FN9012 - Microprocessor CORE Voltage Regulator Two-Phase Buck PWM Controller

Product Overview

Intersil Corporation

Datasheet Details

Part number	FN9012
Manufacturer	Intersil Corporation
File Size	45.69 KB
Description	Microprocessor CORE Voltage Regulator Two-Phase Buck PWM Controller
Datasheet	FN9012 Datasheet
Additional preview pages of the FN9012 datasheet.

Product details

Description

VID3 1 VID2 2 VID1 3 VID0 4 VID25mV 5 COMP 6 FB 7 CT 8 16 VCC 15 REF 14 CS13 PWM1 12 PWM2 11 CS+ 10 PWRGD 9 GND GND (Pin 9) Bias and reference ground.All signals are referenced to this pin.PWRGD (Pin 10) Open drain connection.A high voltage level at this pin with a resistor connected to this terminal and VCC indicates that CORE voltage is at the proper level, VID3 (Pin 1), VID2 (Pin 2), VID1 (Pin 3), VID0 (Pin 4) and VID25mV (Pin 5) Voltage Identification inputs from microprocessor.These

Features

of this controller IC include programmable VID codes from the microprocessor that range from 1.050V to 1.825V with an accuracy of ±0.8%. Pull up currents on these VID pins eliminates the need for external pull up resistors. Another feature of this controller IC is the PWRGD monitor circuit which is held low until the CORE voltage increases, to within 18% of the programmed voltage. Over-voltage, 24% above programmed CORE voltage, results in the PWRGD output going low to indicate that the CORE is.

📁 Similar Datasheet

FN9255 - High performance dual-stage IEC C14 and C20 inlet filter (Schaffner)

Other Datasheets by Intersil Corporation

FN9028 - InfiniBand +12V Bulk and +5V Auxiliary Power Controller

Published: Apr 1, 2005 |