Datasheet4U Logo Datasheet4U.com

IPS5451 - FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH

Description

The IPS5451/IPS5451S are fully protected five terminal high side switch with built in short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback.

The over-current protection latches off the device if the output current exceeds Ishutdown.

Features

  • Over temperature protection (with auto-restart) Over current shutdown Active clamp E. S. D protection Status feedback Open load detection Logic ground isolated from power ground Product Summary Rds(on) V clamp Ishutdown Iopen load 25mΩ (max) 50V 35A 1A.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IPS-250 Spqnnungswandler Battcenter
IPS-265 Low Cost K-Band Transceiver InnoSenT
IPS-BN0703601 LCD InferPoint
IPS-DDK Driver Development Kit Zoran Corporation
IPS031N03L N-Channel MOSFET INCHANGE

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IPS5451 FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
IPS54511 FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
IPS5451S FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
IPS511 FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH
IPS511G FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet No.PD60159-K IPS5451/IPS5451S FULLY PROTECTED HIGH SIDE POWER MOSFET SWITCH Features • • • • • • • Over temperature protection (with auto-restart) Over current shutdown Active clamp E.S.D protection Status feedback Open load detection Logic ground isolated from power ground Product Summary Rds(on) V clamp Ishutdown Iopen load 25mΩ (max) 50V 35A 1A Description The IPS5451/IPS5451S are fully protected five terminal high side switch with built in short circuit, over-temperature, ESD protection, inductive load capability and diagnostic feedback. The over-current protection latches off the device if the output current exceeds Ishutdown. It can be reset by turning the input pin low.
Published: |