M675 - VOLTAGE CONTROLLED SAW OSCILLATOR

Integrated Circuit Systems

Datasheet Details

Part number	M675
Manufacturer	Integrated Circuit Systems
File Size	257.22 KB
Description	VOLTAGE CONTROLLED SAW OSCILLATOR
Datasheet	M675_IntegratedCircuitSystems.pdf

The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation.

Integrated SAW device.
M675-01 output frequencies from 125 to 175 MHz M675-02 output frequencies from 500 to 700 MHz (Specify center frequency at time of order).
Industry-standard Kvco for full compatibility.
Low phase jitter 0.2ps rms typical for the M675-02 (50kHz to 80MHz).
Differential 3.3V LVPECL output.
Single 3.3V power supply.
Small 5 x 7.5mm SMT (surface mount) package Table 1: Sample of Available Output Frequencies Note 1: Specify VCSO center frequ.

📁 M675 Similar Datasheet

M6759 - 8-bit MTP Micro-controller (Acer Laboratories)
M67 - SIMPLE MELODY GENERATOR (Micro Electronics)
M67025E - Tolerant High Speed 8 Kb x 16 Dual Port RAM (ATMEL Corporation)
M67204F - (M6720xxF) Rad Tolerant High Speed 16Kx9 Parallel Fifo (ATMEL Corporation)
M67204H - Rad Tolerant High Speed 4Kx9 CMOS Parallel Fifo (ATMEL Corporation)
M672061F - (M6720xxF) Rad Tolerant High Speed 16Kx9 Parallel Fifo (ATMEL Corporation)
M67206F - (M6720xxF) Rad Tolerant High Speed 16Kx9 Parallel Fifo (ATMEL Corporation)
M67620 - MSM67620 (OKI)

Other Datasheets by Integrated Circuit Systems

Published: Nov 12, 2005 |