Datasheet4U Logo Datasheet4U.com

N82C55AN - IN82C55AN

Description

General The IN82C55AN is a programmable peripheral interface device designed for use in Intel microcomputer systems.

Its function is that of a general purpose I/O component to interface peripheral equipment to the microcomputer system bus.

Features

  • Compatible with all Intel and Most Other Microprocessors High Speed, «Zero Wait State» Operation with 8MHz 8086/88 and 80186/188 24 Programmable I/O Pins Low Power CHMOS Completely TTL Compatible Control Word Read-Back Capability Direct Bit Set/Reset Capability 2.5mA DC Drive Capability on all I/O Port Outputs Available in 40-Pin DIP Available in.

📥 Download Datasheet

Datasheet Details

Part number N82C55AN
Manufacturer Integral
File Size 388.28 KB
Description IN82C55AN
Datasheet download datasheet N82C55AN Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
N82C55A CHMOS PROGRAMMABLE PERIPHERAL INTERFACE Intel Corporation
N82C54 CHMOS Programmable Interval Timer Intel
N8201A Synthetic Instrument Module Agilent(Hewlett-Packard)
N82503 DUAL SERIAL TRANSCEIVER (DST) Intel Corporation
N82510 ASYNCHRONOUS SERIAL CONTROLLER InnovASIC Inc

Other Datasheets by Integral

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IN82C55AN CHMOS PROGRAMMABLE PERIPHERAL INTERFACE The Integral IN82C55AN is a high-performance, CHMOS version of the industry standard IN82C55AN general purpose programmable I/O device which is designed for use with all Intel and most other microprocessors. It provides 24 I/O pins which may be individually programmed in 2 groups of 12 and used in 3 major modes of operation. In MODE 0, each group of 12 I/O pins may be programmed in sets of 4 and 8 to be inputs or outputs. In MODE 1, each group may be programmed to have 8 lines of input or output. 3 of the remaining 4 pins are used for handshaking and interrupt control signals. MODE 2 is a strobed bi-directional bus configuration. www.DataSheet4U.
Published: |