Datasheet4U Logo Datasheet4U.com

IQXT-272 - TCXO

Description

The IQXT-272 employs an analogue ASIC for the oscillator and a high order temperature compensation circuit in a 2.0 x 1.6mm size package.

The device can be placed in power down mode through a single input pin.

Features

  • Excellent phase noise performance Low start up drift rate Height less than 0.8mm Operates at 1.8V supply Power Down Mode Temperature sensor Standard temperature stability of ±0.5ppm over wide temperature ranges Frequency Parameters Frequency 13.0MHz to 52.0MHz Frequency Tolerance ±2.00ppm Frequency Stability ±0.50ppm to ±2.00ppm Frequency calibration + reflow: Offset from the nominal frequency measured at 25˚C.

📥 Download Datasheet

Datasheet Details

Part number IQXT-272
Manufacturer IQD
File Size 216.31 KB
Description TCXO
Datasheet download datasheet IQXT-272 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IQX128B IQX Series I-CUBE
IQX160 IQX Series I-CUBE
IQX240B IQX Series I-CUBE
IQX320 IQX Series I-CUBE
IQXO-35 Industrial Oscillator ETC

Other Datasheets by IQD

Part Number Description
IQXT-270 TCXO
IQXT-274 TCXO
IQXT-275 TCXO
IQXT-200 VCTCXO
IQXT-210 VCTCXO

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ISSUE 1; July 2016 Description The IQXT-272 employs an analogue ASIC for the oscillator and a high order temperature compensation circuit in a 2.0 x 1.6mm size package. The device can be placed in power down mode through a single input pin. During standard operation, power consumption is minimised by operating down to a supply voltage of 1.8V. The IQXT-272's high stability, low power consumption, small footprint and powerful compensation method makes it a TCXO ideally suited for demanding GPS mobile applications. Applications: Communications Consumer GPS Features: Excellent phase noise performance Low start up drift rate Height less than 0.8mm Operates at 1.8V supply Power Down Mode Temperature sensor Standard temperature stability of ±0.
Published: |