Datasheet4U Logo Datasheet4U.com

APM32F072CBT7 - 32-bit MCU

Download the APM32F072CBT7 datasheet PDF. This datasheet also covers the APM32F072RBT7 variant, as both devices belong to the same 32-bit mcu family and are provided as variant models within a single manufacturer datasheet.

Description

7 3.3 GPIO Multiplexing Function Configuration 14 4 Function Description 17 4.1 System Architecture 17 4.1.1 System Block Diagram 17 4.1.2 Storage Mapping 18 4.1.3 Startup Mode 20 4.2 Core 20 4.3 Interrupt Controller 20 4.3.1 Nested Vector Interrupt Controller (NVIC) 20 4.3.2 External Inte

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (APM32F072RBT7-Geehy.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number APM32F072CBT7
Manufacturer Geehy
File Size 1.91 MB
Description 32-bit MCU
Datasheet download datasheet APM32F072CBT7 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
APM32F103RCT6 32-bit MCU APEXMIC
APM32F103RDT6 32-bit MCU APEXMIC
APM32F103RET6 32-bit MCU APEXMIC
APM32F103VCT6 32-bit MCU APEXMIC
APM32F103VDT6 32-bit MCU APEXMIC

Other Datasheets by Geehy

Part Number Description
APM32F072CBT6 32-bit MCU
APM32F072CBU6 32-bit MCU
APM32F072CBU7 32-bit MCU
APM32F072C8T6 32-bit MCU
APM32F072C8T7 32-bit MCU

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet APM32F072xBT7 Arm® Cortex®-M0+ based 32-bit MCU Version: V1.0 1 Product Characteristics  Core – 32-bit Arm® Cortex®-M0+Core – Up to 48MHz working frequency  On-Chip Memory – Flash：128KB – SRAM：16KB  Clock – External 4~32MHz Crystal oscillator – 32.768KHz oscillator with calibration – Internal 8MHz RC oscillator – Internal 48MHz self-correcting RC oscillator – Internal 40KHz RC oscillator – PLL supports 2~16 frequency doubling  Reset, Power Management – Power-on/ Power-down reset (POR/PDR) – Programmable voltage regulator – Digital supply voltage: VDD=2.0~3.6V – Analog supply voltage: VDDA=VDD~3.6V – Partial I/O supply voltage: VDDIO2=1.65~3.6V – Support external battery VBAT to supply power to RTC and backup register: VBAT=1.65~3.
Published: |