NAS1351 - (NAS1352) Socket Head Cap Screws

Datasheet Summary

Features

if desired. After features (if any) then the Overall DataSheet4U. com Features for rotational security. Length is stated in 1/16ths of an inch. The last ( H ) for Drilled Head, or designation is for plating or finish. P= Cadmium II Plating Type 2, class 2, All materials ( LE ) for self locking element any type ( LL ) for self locking element Strip Type S= Silver Flashed for ( C ) and ( N ) materials. ( LN ) for self locking element Pellet Type No Suffix = Black oxide for (Alloy Steel) and Passiva.

NAS1351 (NAS1352) Socket Head Cap Screws by GAH - Datasheet Preview — Datasheet preview – NAS1351

Datasheet Details

Part number	NAS1351
Manufacturer	GAH
File Size	299.46 KB
Description	(NAS1352) Socket Head Cap Screws
Datasheet	NAS1351 Datasheet
Additional preview pages of the NAS1351 datasheet.

📁 Similar Datasheet

NAS1351-04-6 - Socket Cap Screws (Fastenal)
NAS1351-06-10 - Socket Cap Screws (Fastenal)
NAS1351-06-4 - Socket Cap Screws (Fastenal)
NAS1351-08-10 - Socket Cap Screws (Fastenal)
NAS1351-08-12 - Socket Cap Screws (Fastenal)
NAS1351-3-10 - Socket Cap Screws (Fastenal)
NAS1351-3-10P - SOCKET HEAD CAP SCREWS (AIRCRAFT)
NAS1351-3-12 - Socket Cap Screws (Fastenal)
NAS1351-3-12P - SOCKET HEAD CAP SCREWS (AIRCRAFT)
NAS1351-3-16 - Socket Cap Screws (Fastenal)

Other Datasheets by GAH

NAS1352 - Socket Head Cap Screws

Full PDF Text Transcription

Click to expand full text

www.DataSheet4U.com NAS1351 (Fine) and NAS1352(Coarse) Socket Head Cap Screws Genuine Aircraft Hardware Co. Then to designate material add a( - ) for Alloy Steel 180KSI, or a ( C ) for Corrosion Resistant Steel (18-8) 80KSI, or an ( N ) 140-160KSI for Heat Resisting Steel per AMS5731 or 5737 (A286). After the ( - , C, or N) for material, place the Diameter Designation for your desired Shank Diameter that corresponds with your desired Thread Size. After all that but before the Length add Features if desired. After features (if any) then the Overall DataSheet4U.com Features for rotational security. Length is stated in 1/16ths of an inch. The last ( H ) for Drilled Head, or designation is for plating or finish.

Published: Jul 14, 2005 |