Datasheet4U Logo Datasheet4U.com

MC56F8135 - 16-bit Digital Signal Controller

Download the MC56F8135 datasheet PDF. This datasheet also covers the MC56F8335 variant, as both devices belong to the same 16-bit digital signal controller family and are provided as variant models within a single manufacturer datasheet.

Description

Deleted RSTO from Pin Group 2 (listed after Table 10-1).

Deleted formula for Max Ambient Operating Temperature (Automotive) and Max Ambient Operating Temperature (Industrial) in Table 10-4.

Added RoHS-compliance and “pb-free” language to back cover.

Features

  • in italics are NOT available in the 56F8135 device.
  • Up to 60 MIPS at 60MHz core frequency.
  • DSP and MCU functionality in a unified, C-efficient architecture.
  • 64KB Program Flash.
  • 4KB Program RAM.
  • 8KB Data Flash.
  • 8KB Data RAM.
  • 8KB Boot Flash.
  • Up to two 6-channel PWM modules.
  • Four 4-channel, 12-bit ADCs.
  • Temperature Sensor.
  • Up to two Quadrature Decoders.
  • FlexCAN module.
  • Optional On.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MC56F8335_FreescaleSemiconductor.pdf) that lists specifications for multiple related part numbers.

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
56F8335/56F8135 Data Sheet Preliminary Technical Data 56F8300 16-bit Digital Signal Controller MC56F8335 Rev. 5 01/2007 freescale.com Version History Rev. 0 Rev. 1 Rev. 2 Rev. 3 Rev. 4 Rev. 5 Document Revision History Description of Change Initial Release Deleted RSTO from Pin Group 2 (listed after Table 10-1). Deleted formula for Max Ambient Operating Temperature (Automotive) and Max Ambient Operating Temperature (Industrial) in Table 10-4. Added RoHS-compliance and “pb-free” language to back cover. Added information/corrected state during reset in Table 2-2. Clarified external reference crystal frequency for PLL in Table 10-14 by increasing maximum value to 8.4MHz. Replaced “Tri-stated” with an explanation in State During Reset column in Table 2-2.
Published: |