Datasheet4U Logo Datasheet4U.com

FT629 - Switch Detection Chip

Description

The FT629 is a switch detection chip.

It will detect a change on any of its five input pins and send one byte out of the TX pin.

The output byte’s lower five bits correspond to the state of the input pins 1-5.

📥 Download Datasheet

Datasheet Details

Part number FT629
Manufacturer Ferret
File Size 128.83 KB
Description Switch Detection Chip
Datasheet download datasheet FT629 Datasheet

📁 Similar Datasheet

  • ft6203 - 1.25W Fully Differential Audio Power Amplifier (Fangtek)
  • FT6206 - Self-Capacitive Touch Panel Controller (FocalTech Systems)
  • FT6206GMA - Self-Capacitive Touch Panel Controller (FocalTech Systems)
  • FT6208 - Single Channel DC Motor Driver (XTX Technology)
  • FT6236 - Self-Capacitive Touch Panel Controller (FocalTech Systems)
  • FT6236U - Self-Capacitive Touch Panel Controller (FocalTech Systems)
  • FT6264 - ULTRA HIGH SPEED 8K x 8 STATIC CMOS RAMS (Force Technologies)
  • FT6264L - ULTRA HIGH SPEED 8K x 8 STATIC CMOS RAMS (Force Technologies)
  • FT62F28 - 8-bit RISC MCU (FMD)
  • FT600Q - USB 3.0 to FIFO Bridge (FTDI)
Other Datasheets by Ferret

    Full PDF Text Transcription

    Click to expand full text
    FT629 ‘Otter’ Switch Detection Chip General Description: The FT629 is a switch detection chip. It will detect a change on any of its five input pins and send one byte out of the TX pin. The output byte’s lower five bits correspond to the state of the input pins 1-5. Figure 1: FT629 pin out www.DataSheet4U.com Operation: The operation of the FT629 is very simple. It will transmit one byte each time there is a change on one of its input pins. There is some debouncing built into the FT629. It will detect a change on the input pins and then send out one byte. Therefore, there will be a 4.16 ms delay after a change is detected before it will check for another pin change.
    Published: |