Datasheet4U Logo Datasheet4U.com

FXLA101 - Low-Voltage Dual-Supply 1-Bit Voltage Translator

Description

The FXLA101 is a configurable dual-voltage supply translator for both uni-directional and bi-directional voltage translation between two logic levels.

The device allows translation between voltages as high as 3.6V to as low as 1.1V.

Features

  • Bi-Directional Interface between Two Levels: from 1.1V to 3.6V.
  • Fully Configurable: Inputs and Outputs Track VCC.
  • Non-Preferential Power-Up; Either VCC May Be Powered Up First.
  • Outputs Switch to 3-State if Either VCC is at GND.
  • Power-Off Protection.
  • Bus-Hold on Data Inputs Eliminates the Need for Pull-Up Resistors; Do Not Use Pull-Up Resistors on A or B Ports.
  • Control Input (/OE) Referenced to VCCA Voltage.
  • Packaged in MicroPak™ 6 (1.00mm x 1.45mm).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
FXLA102 Low-Voltage Dual-Supply 2-Bit Voltage Translator ON Semiconductor
FXLA104 Low-Voltage Dual-Supply 4-Bit Voltage Translator ON Semiconductor
FXLA108 Low-Voltage Dual-Supply 8-Bit Voltage Translator ON Semiconductor
FXLA0104 Low-Voltage Dual-Supply 4-Bit Voltage Translator ON Semiconductor
FXL0412 Wire Wound Molded SMD Power Inductors CJIANG

Other Datasheets by Fairchild (onsemi)

Part Number Description
FXLA102 Low Voltage Dual Supply 2-Bit Voltage Translator
FXLA104 Low-Voltage Dual-Supply 4-Bit Voltage Translator
FXLA108 Low-Voltage Dual-Supply 8-Bit Voltage Translator
FXL2SD106 Low Voltage Dual Supply 6-Bit SD Interface Voltage Translator
FXL2T245 Low Voltage Dual Supply 2-Bit Signal Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FLXA101 — Low-Voltage Dual-Supply 1-Bit Voltage Translator with Auto Direction Sensing March 2012 FXLA101 Low-Voltage Dual-Supply 1-Bit Voltage Translator with Auto Direction Sensing Features  Bi-Directional Interface between Two Levels: from 1.1V to 3.6V  Fully Configurable: Inputs and Outputs Track VCC  Non-Preferential Power-Up; Either VCC May Be Powered Up First  Outputs Switch to 3-State if Either VCC is at GND  Power-Off Protection  Bus-Hold on Data Inputs Eliminates the Need for Pull-Up Resistors; Do Not Use Pull-Up Resistors on A or B Ports  Control Input (/OE) Referenced to VCCA Voltage  Packaged in MicroPak™ 6 (1.00mm x 1.45mm)  Direction Control Not Necessary  100Mbps Throughput when Translating Between 1.8V and 2.
Published: |