Datasheet4U Logo Datasheet4U.com

FST3244 - Octal Bus Switch

Download the FST3244 datasheet PDF. This datasheet also covers the FST variant, as both devices belong to the same octal bus switch family and are provided as variant models within a single manufacturer datasheet.

Description

The Fairchild Switch FST3244 provides 8-bits of highspeed CMOS TTL-compatible bus switching in a standard ’244 pin-out.

The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise.

Features

  • s 4Ω switch connection between two ports. s Minimal propagation delay through the switch. s Low lCC. s Zero bounce in flow-through mode. s Control inputs compatible with TTL level. Ordering Code: Order Number FST3244WM FST3244QSC FST3244MTC Package Number M20B MQA20 MTC20 Package.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (FST-3244.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
FST3050 Schottky Barrier Rectifier INCHANGE
FST31100 30 AMP SCHOTTKY RECTIFIERS Microsemi Corporation
FST31120 (FST31120 - FST31150) 30 AMP SCHOTTKY RECTIFIERS Microsemi Corporation
FST31130 (FST31120 - FST31150) 30 AMP SCHOTTKY RECTIFIERS Microsemi Corporation
FST31150 (FST31120 - FST31150) 30 AMP SCHOTTKY RECTIFIERS Microsemi Corporation

Other Datasheets by Fairchild (onsemi)

Part Number Description
FST3244MTC Octal Bus Switch
FST3244QSC Octal Bus Switch
FST3244WM Octal Bus Switch
FST3245 8-Bit Bus Switch
FST32211 40/48-Bit Bus Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FST3244 Octal Bus Switch June 1997 Revised December 1999 FST3244 Octal Bus Switch General Description The Fairchild Switch FST3244 provides 8-bits of highspeed CMOS TTL-compatible bus switching in a standard ’244 pin-out. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device is organized as two 4-bit switches with separate OE inputs. When OE is LOW, the switch is ON and Port A is connected to Port B. When OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports. Features s 4Ω switch connection between two ports. s Minimal propagation delay through the switch. s Low lCC. s Zero bounce in flow-through mode.
Published: |