CWS-4001A Datasheet (ETC) - 12A mps Output Choke

CWS-4001A, 12A mps Output Choke

5 .064 [1.626]MAX .26 [6.604]MAX 4 WHERE SHOWN, USING A PERMANENT MARKING METHOD MARK PART NUMBER AND REVISION BOTTOM CORE LOCATED AS SHOWN 6 APPLY ONE KAPTON TAPE TO COVER THE EDGES OF 6 THE SMT LEADS MUST REST FLAT ON PCB, CO-PLANAR FILL WINDING AND CORE WITH EPOXY 2 PART A&B (600°F,315°C) 5 REMOVE INSULATION AND TIN LEADS APPROX.

0.1 INCH HELIX WIND 3 TURNS TIGHT TO CORE AND EVENLY SPACED CONSTRUCTION: HI-POT (2 SECOND, 5mA MAX.) 300 VRMS WINDING TO CORE DCR = 4.0 MILLI-OHM, MAX.

CURRENT RATI