Datasheet4U Logo Datasheet4U.com

MA1916 - Radiation Hard Reed-Solomon & Convolution Encoder

Description

VDD and GND (Power and Ground) The MA1916 uses a single power supply of 5V ±10%.

CLK (Clock) This input supplies a clock signal to the RS encoder and the Test generator.

It requires a signal with a nominal 50% duty cycle running at twice the input data rate for the RS encoder.

Features

  • s Radiation Hard CMOS-SOS Technology s Low Power Consumption s Latch-up Free s High SEU Immunity s CCSDS Standard RS (255, 223) s Selectable Interleave Depths of 1, 4 or 5 s 5MBit/sec Input Data Rate Figure 1: Block Diagram 1/11 MA1916.

📥 Download Datasheet

Datasheet Details

Part number MA1916
Manufacturer Dynex
File Size 94.95 KB
Description Radiation Hard Reed-Solomon & Convolution Encoder
Datasheet download datasheet MA1916 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MA1916 MA1916 Radiation Hard Reed-Solomon & Convolution Encoder Replaces June 1999 version, DS3590-4.0 DS3590-5.0 January 2000 The purpose of the MA1916 is to encode serial data to allow error correction when the data is transmitted over a noisy communication link. As the name suggests, the unit contains two encoding elements. The Reed-Solomon encoder appends a checksum to a block of data, guarding against burst errors in a message. The convolution encoder continuously creates two code bits for each data bit it receives, increasing the noise immunity by doubling the band width of the message. The unit also contains a test pattern generator which can be connected to check the functionality of the RS encoder and to provide a message timing signal (SMC_OUT).
Published: |