Datasheet4U Logo Datasheet4U.com

AP7365 - Fast Transient Low Dropout Linear Regulator

Description

The AP7365 is a 600mA, adjustable and fixed output voltage, low dropout linear regulator.

This device includes pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry.

The device is turned on when EN pin is set to logic high level.

Features

  • 600mA Low Dropout Regulator with EN.
  • Very Low IQ: 35µA.
  • Wide Input Voltage Range: 2V to 6V.
  • Wide Adjustable Output: 0.8V to 5.0V.
  • Fixed Output Options: 0.8V to 3.9V (0.1V Step Size Possible).
  • High PSRR: 65dB at 1kHz.
  • Fast Start-Up Time: 200µs.
  • Stable with Low ESR, 1µF Ceramic Output Capacitor.
  • Excellent Load/Line Transient Response.
  • Low Dropout: 300mV at 600mA.
  • Current Limit and Short Circuit Protection.
  • Thermal Shutdown Protection.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AP7361 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR Diodes
AP7361C 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR Diodes
AP7361E 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR DIODES
AP7361EA 1A LOW DROPOUT ADJUSTABLE AND FIXED-MODE REGULATOR DIODES
AP7362 FAST TRANSIENT ULTRA-LOW DROPOUT LINEAR REGULATOR Diodes

Other Datasheets by Diodes Incorporated

Part Number Description
AP7335 Fast Transient Low Dropout Linear Regulator
AP7115 150mA LOW DROPOUT LINEAR REGULATOR
AP7165 600mA LOW DROPOUT REGULATOR
AP7167 1.2A LOW DROPOUT REGULATOR
AP7168 1.2A LOW DROPOUT REGULATOR

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NOT RECOMMENDED FOR NEW DESIGN USE AP7366 AP7365 600mA, LOW QUIESCENT CURRENT FAST TRANSIENT LOW DROPOUT LINEAR REGULATOR Description The AP7365 is a 600mA, adjustable and fixed output voltage, low dropout linear regulator. This device includes pass element, error amplifier, band-gap, current limit and thermal shutdown circuitry. The device is turned on when EN pin is set to logic high level. The characteristics of low dropout voltage and low quiescent current make it suitable for low power applications such as battery powered devices. The typical quiescent current is approximately 35μA. Built-in current-limit and thermal-shutdown functions prevent IC from damage in fault conditions. This device is available with adjustable output from 0.8V to 5.0V, and fixed version with 0.8V, 1.0V, 1.
Published: |