ND12S0A0V50 - DC/DC Power Modul

Delta Electronics

ND12S0A0V50 Datasheet Preview — Preview of ND12S0A0V50 PDF

Datasheet Details

Part number	ND12S0A0V50
Manufacturer	Delta Electronics
File Size	576.22 KB
Description	DC/DC Power Modul
Datasheet	ND12S0A0V50_DeltaElectronics.pdf

ND12S0A0V50 Product details

Description

ENABLE (On/Off) The ENABLE (on/off) input allows external circuitry to put the ND converter into a low power dissipation (sleep) mode.Positive ENABLE is available as standard.Positive ENABLE units of the ND series are turned on if the ENABLE pin is high or floating.Pulling the pin low will turn off the unit.With the active high function, the output is guaranteed to turn on if the ENABLE pin is driven above 2.4V.The output will turn off if the ENABLE pin voltage is pulled below 0.8V.The EN

Features

High Efficiency: 93% @ 12Vin, 3.3V/50A out Size: 61.0x31.8x10.2mm (2.40”×1.25”×0.40”) Voltage and resistor-based trim No minimum load required Output voltage programmable from 0.9Vdc to 3.63Vdc via external resistors Fixed frequency operation Single-in line package (SIP) Input UVLO, output OCP, OTP, SCP Remote ON/OFF (Positive) Power good output signal (open collector) Output voltage sense ISO 9001, TL 9000, ISO 14001, QS9000, OHSAS18001 certified manufacturing facility UL/cUL 60950 (US & Canada.

📁 ND12S0A0V50 Similar Datasheet

ND101 - Antenna Switching Pin Diode (AUK)
ND102 - Antenna Switching Diode (AUK)
ND102M4AL - Antenna Switching Diode Array (AUK)
ND102M4L - Antenna Switching Diode Array (AUK)
ND102M6L - Antenna Switching Diode Array (AUK)
ND111 - Band switching Diode (AUK)
ND112 - Band switching Diode (AUK)
ND151 - SCHOTTKY BARRIER DIODE (AUK)

Other Datasheets by Delta Electronics

Published: May 1, 2007 |