DNT04 - Non-Isolated Point of Load DC/DC Power Modules

Product Overview

Delta Electronics

Datasheet Details

Part number	DNT04
Manufacturer	Delta Electronics
File Size	915.86 KB
Description	Non-Isolated Point of Load DC/DC Power Modules
Datasheet	DNT04 Datasheet
Additional preview pages of the DNT04 datasheet.

Product details

Description

Remote On/Off The DNT series power modules have an On/Off pin for remote On/Off operation.Both positive and negative On/Off logic options are available in the DNT series power modules.For positive logic module, connect an open collector (NPN) transistor or open drain (N channel) MOSFET between the On/Off pin and the GND pin (see figure 28).Positive logic On/Off signal turns the module ON during the logic high and turns the module OFF during the logic low.When the positive On/Off function is

Features

High Efficiency: 94%@ 5Vin, 3.3V/3A out Small size and low profile: 0.80” x 0.45” x 0.27” (SMD) 0.90” x 0.40” x 0.25” (SIP) Standard footprint and pinout Resistor-based trim Output voltage programmable from 0.75V to 3.3V via external resistors Pre-bias startup No minimum load required Fixed frequency operation Input UVLO, Output OTP, OCP Remote ON/OFF ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) Recognized, and TUV (EN60950)- pend.

📁 Similar Datasheet

DNT2400 - Low Cost 2.4 GHz FHSS Transceiver Module (Murata)
DNT90 - Low Cost 900 MHz FHSS Transceiver (Murata)
DNT90CA - (DNT90CA/PA) 900 MHz Frequency Hopping Spread Spectrum Transceiver (RF Monolithics)
DNT90PA - (DNT90CA/PA) 900 MHz Frequency Hopping Spread Spectrum Transceiver (RF Monolithics)

Other Datasheets by Delta Electronics

Published: Apr 18, 2007 |