Datasheet4U Logo Datasheet4U.com

DS2114 - SCSI Terminator

Description

The SCSI 2 and SCSI 3 standards recommend the use of active terminations at both ends of every cable segment in a SCSI system with single

ended drivers and receivers.

Features

  • PIN.

📥 Download Datasheet

Datasheet Details

Part number DS2114
Manufacturer Dallas Semiconducotr
File Size 71.92 KB
Description SCSI Terminator
Datasheet download datasheet DS2114 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
DS2110 Plug and Play SCSI Terminator Dallas Semiconductor
DS2117M Ultra3 LVD/SE SCSI Terminator Dallas Semiconductor
DS21054E 16K 1.8V I2C SERIAL EEPROM Microchip Technology
DS2106SY Rectifier Diode Dynex Semiconductor
DS2107SY Rectifier Diode Dynex Semiconductor

Other Datasheets by Dallas Semiconducotr

Part Number Description
DS2118M Ultra3 LVD/SE SCSI Terminator
DS2119M Ultra3 LVD/SE SCSI Terminator
DS2108 Differential SCSI Switchable Terminator
DS2120 Ultra3 LVD SCSI Terminator
DS2129 LVD SCSI 27-Line Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DS2114 DS2114 SCSI Terminator FEATURES PIN ASSIGNMENT TERMPWR1 R1 R2 R3 R4 R5 VREF1 GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 NC VREF2 R9 R8 R7 R6 NC TERMPWR2 • Fully compliant with SCSI, SCSI–2 and SCSI–3 standards • Provides active termination for nine signal lines • Laser–trimmed 110 ohms termination resistors have 2% tolerance • Low dropout voltage regulator • Fully supports actively negated SCSI signals • Onboard thermal shutdown circuitry • Narrow 16–pin plastic SOIC (DS2114Z) DS2114Z 16–PIN SOIC (150 MIL) DESCRIPTION The SCSI–2 and SCSI–3 standards recommend the use of active terminations at both ends of every cable segment in a SCSI system with single–ended drivers and receivers.
Published: |