Datasheet4U Logo Datasheet4U.com

CYPD1120 - USB Power Delivery Alternate Mode Controller

Description

CPD1120 device belongs to Cypress’s CCG1 product family which provides a complete USB Type-C and USB Power Delivery port control solution.

Features

  • Two configurable 16-bit TCPWM blocks.
  • One I2C master or slave Type-C Support.
  • Integrated transceiver (BB PHY) PD Support.
  • Supports VESA DisplayPort Alternate Mode on USB Type-C Standard Version 1.0 32-bit MCU Subsystem.
  • 48-MHz ARM Cortex-M0 CPU with 32-KB flash and 4-KB SRAM Integrated analog blocks.
  • 12-bit, 1-Msps ADC for VBUS voltage and current monitoring Low-power operation.
  • 1.8-V to 5.5-V operation.
  • Sleep 1.3 mA, Deep Sleep 1.3 uA Packages.
  • 4.

📥 Download Datasheet

📁 Similar Datasheet

  • CYPD2803 - CMG2 USB Type-C EMCA controller (Infineon)
  • CYPD3171 - CCG3PA Consumer USB Type-C port controller (Infineon)
  • CYPD3174 - CCG3PA Consumer USB Type-C port controller (Infineon)
  • CYPD3175 - CCG3PA Consumer USB Type-C port controller (Infineon)
  • CYPD6129 - CCG6_CFP USB-C Power Delivery (PD) controller (Infineon)
  • CYPD6139 - CCG6_CFP USB-C Power Delivery (PD) controller (Infineon)
  • CYPD6229 - CCG6_CFP USB-C Power Delivery (PD) controller (Infineon)
  • CYPD6239 - CCG6_CFP USB-C Power Delivery (PD) controller (Infineon)
  • CYPD7271 - CCG7DC dual-port USB-C power delivery and DC-DC controller (Infineon)
  • CYPD7272 - CCG7DC dual-port USB-C power delivery and DC-DC controller (Infineon)
Other Datasheets by Cypress Semiconductor

Full PDF Text Transcription

Click to expand full text
PRELIMINARY CYPD1120 Datasheet USB Power Delivery Alternate Mode Controller on Type-C General Description CPD1120 device belongs to Cypress’s CCG1 product family which provides a complete USB Type-C and USB Power Delivery port control solution. The scalable and reconfigurable core architecture of CCG1 enables a base Type-C solution that can scale to a complete 100-W USB Power Delivery with Alternate Mode mux support. CCG1 is also a Type-C cable ID IC for active and passive cables. The ARM® Cortex®-M0 CPU based core can use common open source firmware or custom solutions developed with common libraries and APIs. CCG1 is the CC controller that detects connector insert, plug orientation, and VCONN switching signals.
Published: |