Datasheet4U Logo Datasheet4U.com

CMD6208 - Reversible Motor Driver

Description

PIN NO (SOP -8 ) PIN NO (SIP-9 ) Symbol I/O Description 1 2 3 4 5 6 7 8 6 7 5 8 2 1,4 3 VCC BOUT GND AOUT BIN NC GND AIN O O I I Power supply B Output Ground A output B input Ground A input FExternal dimensions (Units: mm) CMD6208N CMD6208 www.DataSheet4U.com All specs and appli

Features

  • www. DataSheet4U. com 1) Motor driving power transistors are built in (100mA typically). 2) Brake is applied when stopping the motor (when inputs A and B are both HIGH level). 3) Built-in diode to absorb surge currents. FAbsolute maximum ratings (Ta = 25_C) 4) Very low standby circuit current when inputs A and B are both LOW level. 5) Wide range of operating supply voltage (4.5 X 15.0V). 6) Direct control with the TTL logic. CMD6208 CMD6208F FRecommended operating conditions (Ta = 25_C) FInput.

📥 Download Datasheet

Datasheet Details

Part number CMD6208
Manufacturer Ceramate Technical
File Size 116.94 KB
Description Reversible Motor Driver
Datasheet download datasheet CMD6208 Datasheet

📁 Similar Datasheet

  • CMD6053 - (CMD5052 - CMD6053) T-1 3/4 Standard Red LED Lamps (Chicago Miniature Lamp)
  • CMD60N03 - N-Ch 30V Fast Switching MOSFETs (Cmos)
  • CMD64 - General Power Transformer (Sumida Corporation)
  • CMD65 - General Power Transformer (Sumida Corporation)
  • CMD69273 - 2-port MIMO Ceiling Mount Antenna (Laird Technologies)
  • CMD6D11B - POWER INDUCTORS (Sumida Corporation)
  • CMD-3881320 - CMD-3881320 (SHARLIGHT)
  • CMD-6LNL - General Power Transformer (Sumida Corporation)
  • CMD02 - Magic Switch (Champion)
  • CMD04N03 - N-Ch 30V Fast Switching MOSFETs (Cmos)
Other Datasheets by Ceramate Technical

Full PDF Text Transcription

Click to expand full text
CMD6208 Reversible Motor Driver The CMD6208 and CMD6208F are monolithic ICs used for driving reversible motors. They allow control of reversible motors in cassette players and other electrical equipment by using TTL-level logic signals. The ICs contain a logic section, which controls forward and reverse rotations as well as forced stop, and an output power section, which can supply an output current of up to 100mA (typical) according to the logic control. FFeatures www.DataSheet4U.com 1) Motor driving power transistors are built in (100mA typically). 2) Brake is applied when stopping the motor (when inputs A and B are both HIGH level). 3) Built-in diode to absorb surge currents.
Published: |