Datasheet4U Logo Datasheet4U.com

STK300 - megaAVR Starter Kit User Manual

Datasheet Summary

Description

The main

Features

  • of the board are shown in the diagram below. Note: There are a number of jumpers on the board which are used to select different operations and voltages. The default jumper settings are for programming operations at 5V JP1 Closed, with brown-out also set to 5V JP2 Open. To carry out other operations, some jumpers may have to be removed.
  • refer to the relevant section for details. A full list of the jumpers and links are given in the table below. 4 Hardware.

📥 Download Datasheet

Datasheet preview – STK300

Datasheet Details

Part number STK300
Manufacturer ATMEL
File Size 285.69 KB
Description megaAVR Starter Kit User Manual
Datasheet download datasheet STK300 Datasheet
Additional preview pages of the STK300 datasheet.

📁 Similar Datasheet

  • STK300 - USER MANUAL (KANDA SYSTEMS)
  • STK301-020 - 7-Band 2-Channel Electronic Graphic Equalizer (Sanyo)
  • STK301-090 - 7-Band / 2-Channel Electronic Graphic Equalizer (Sanyo)
  • STK301-220 - 7-Band / 2-Channel Electronic Graphic Equalizer (Sanyo)
  • STK3041 - (STK30xx) Voltage Amp for 30 to 100W AF Power Amp (ETC)
  • STK3042 - VOLTAGE AMPLIFIER FOR 40 to 90W AF POWER AMP (ETC)
  • STK3042 - AUDIO POWER AMPLIFIER (Sanyo)
  • STK3042II - VOLTAGE AMP FOR 40 TO SOW AF POWER AMP (ETC)
  • STK3061 - (STK30xx) Voltage Amp for 30 to 100W AF Power Amp (ETC)
  • STK3062 - AUDIO POWER AMPLIFIER (Sanyo)
Other Datasheets by Atmel
  • STK200 - Flash MCU Starter Kit User Guide Manual

Full PDF Text Transcription

Click to expand full text
STK300 megaAVR Starter Kit User Manual ATMEL Corporation 2325 Orchard Parkway San Jose, CA 95131 Section 1 Introduction Welcome to the megaAVR® Starter kit. This system incorporates an applications board and in-system programming hardware key, for programming AVR devices in your application. Be sure to check the README.TXT file included with the software for installation information. 1.1 Device Support The system software currently has support for the following devices. n ATmega603 n n n ATmega603L ATmega103 ATmega103L Software upgrades for new devices will be available in the AVR section of the Atmel website, which is located at http://www.atmel.com. 1 Section 2 Getting Started 2.
Published: |