AT2008 - 8 Channels ADPCM Processor

The AT2008 by Atelic is a 8 Channels ADPCM Processor. Below is the official datasheet preview.

Datasheet Details

Part number	AT2008
Manufacturer	Atelic
File Size	327.93 KB
Description	8 Channels ADPCM Processor
Datasheet	AT2008_Atelic.pdf
Additional preview pages of the AT2008 datasheet.

AT2008 Product details

Description

www.DataSheet4U.com The AT2008 is an eight full-duplex channels ADPCM processor.It follows the G.726 ITU Standard for ADPCM compression for 40k, 32k, 24k and 16k bit rates with selectable µ-law and A-law input/output.This chip can operate on 16 channels of PCM to ADPCM compression, 16 channels of ADPCM to PCM decompression, 8 channels of full-duplex operation in an 8KHz frame basis, or any combination of M-channels of compression plus N-channels of decompression when M+N

Features

8 full channels of ITU G.726 ADPCM ADPCM coding and decoding with bypass mode Per channel selectable µ-Law and A-law input/output Up to 8 synchronous signals for direct interface with popular combo/codec. On-chip time slot assignment Available internal clock generator and frame sync. generator Simple 3-wire serial command port for chip configuration On-chip power-up/power down/reset The two clock pins (CLKA.

📁 AT2008 Similar Datasheet

AT2002 - (AT2002/2402/2702) AT Monaural Color TV (APEX)
AT2003 - Wide Input sensorless CC/CV 2A Buck Converter (Aplustek Integrated Circuits)
AT2004 - 4 Channel ADPCM Processor (Atelic Systems)
AT2005B - AT2005B (ATE)
AT20-0106 - Digital Attenuator/ 50 dB/ 6-Bit/ TTL Driver/ DC - 2 GHz (Tyco Electronics)
AT20-0107 - Digital Attenuator/ 31.5 dB/ 6-Bit/ TTL Driver/ DC - 2.0 GHz (Tyco Electronics)
AT20-0263 - Digital Attenuator/ 31 dB/ 5-Bit/ TTL Driver/ DC - 2 GHz (Tyco Electronics)
AT20-0273 - Digital Attenuator/ 32 dB/ 2-Bit/ TTL Driver/ DC - 2 GHz (Tyco Electronics)

Other Datasheets by Atelic

Published: Nov 13, 2008 |