LTC7810 - 2-Phase Synchronous Step-Down DC/DC Controller

Name: LTC7810
SKU: LTC7810-1371620

Analog Devices

📥 Download Datasheet

LTC7810 Datasheet Preview — Preview of LTC7810 PDF

Datasheet Details

Part number	LTC7810
Manufacturer	Analog Devices
File Size	3.91 MB
Description	2-Phase Synchronous Step-Down DC/DC Controller
Datasheet	LTC7810-AnalogDevices.pdf

LTC7810 Product details

Description

The LTC®7810 is a high performance dual step-down DC/ DC switching regulator controller that drives all N-channel synchronous power MOSFET stages that can operate from voltages up to 140V.

Features

n Wide VIN Range: 4.5V to 140V (150V Abs Max) n Wide Output Voltage Range: 1V ≤ VOUT ≤ 60V n Low Operating IQ: 16μA (48VIN to 12VOUT and 3.3VOUT) n Adjustable Gate Drive Level Up to 10V n Optional Spread Spectrum Operation n Very Low Dropout: 100% Duty Cycle Operation n Low IQ in Dropout: 78µA (One Channel On) n RSENSE or Inductor DCR Current Sensing n Out-of-Phase Controllers Reduce Required Input Capacitance and Power Supply Induced Noise n Phase-Lockable Frequency (75kHz to 720kHz) n Programm.

📁 LTC7810 Similar Datasheet

LTC7812 - 38V Synchronous Boost+Buck Controller (Linear Technology)
LTC7815 - Buck/Buck/Boost Synchronous Controller (Linear Technology)
LTC7820 - Fixed Ratio High Power Inductorless (Charge Pump) DC/DC Controller (Linear Technology)
LTC7860 - High Efficiency Switching Surge Stopper (Linear Technology)
LTC7000 - Fast 150V Protected High Side NMOS Static Switch Driver (Linear)
LTC7000-1 - Fast 150V Protected High Side NMOS Static Switch Driver (Linear)
LTC7001 - Fast 150V High Side NMOS Static Switch Driver (Linear)
LTC7003 - Fast 60V Protected High Side NMOS Static Switch Driver (Linear)

Other Datasheets by Analog Devices

LTC7818 - Buck/Buck/Boost Synchronous Controller
LTC7800 - High Frequency Synchronous Step-Down Controller
LTC7801 - Synchronous Step-Down DC/DC Controller
LTC7803 - 3MHz Synchronous Step-Down Controller
LTC7804 - Boost Controller
LTC7821 - Hybrid Step-Down Synchronous Controller

Published: May 23, 2019 |