ASM3P2853A - Peak EMI Reducing Solution

Alliance Semiconductor Corporation

The ASM3P2853A by Alliance Semiconductor Corporation is a Peak EMI Reducing Solution. Below is the official datasheet preview.

Datasheet Details

Part number	ASM3P2853A
Manufacturer	Alliance Semiconductor Corporation
File Size	2.67 MB
Description	Peak EMI Reducing Solution
Datasheet	ASM3P2853A_AllianceSemiconductorCorporation.pdf
Additional preview pages of the ASM3P2853A datasheet.

The ASM3P2853A is a versatile spread spectrum frequency modulator. Santa Clara CA Tel: 408-855-4900 Fax: 408-855-

Generates an EMI optimized clock signal at output. Input frequency: 25 MHz. Frequency outputs: o o USB Clock (48 MHz unmodulated) 50 MHz (modulated), ±1% centre spread shielding that are required to pass EMI regulations. The ASM3P2853A modulates the output of PLL in order to spread the bandwidth of a synthesized clock, thereby decreasing the peak amplitudes of its harmonics. This results in significantly lower system EMI compared to the typical narrow band signal produced by oscillators and mos.

📁 ASM3P2853A Similar Datasheet

Other Datasheets by Alliance Semiconductor Corporation

ASM3P2811A - (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2811B - (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2812A - (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2812B - (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2814A - (ASM3P281xA/B) Low Power EMI Reduction IC
ASM3P2814B - (ASM3P281xA/B) Low Power EMI Reduction IC

Published: Mar 3, 2009 |