Datasheet4U Logo Datasheet4U.com

AH8102 - ULTRA-SENSITIVE HALL EFFECT SWITCH

Features

  • AH8102 is with two Hall effect plates and a CMOS.
  • output driver, mainly designed for battery.
  • powered,.
  • hand-held equipment (such as Cellular and Cordless.
  • Phone, PDA). E. g. as an On/Off switch in Cellular Flip-Phones, with battery operating voltages of 2.4V-5.5V. Either north or south pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density (B) is larger than operate point (Bop), the out.

📥 Download Datasheet

Datasheet Details

Part number AH8102
Manufacturer AiT Semiconductor
File Size 277.26 KB
Description ULTRA-SENSITIVE HALL EFFECT SWITCH
Datasheet download datasheet AH8102 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AH810 Hall current sensor Alfa Electronics
AH810S Hall current sensor Alfa Electronics
AH811 Hall current sensor Alfa Electronics
AH812 Hall current sensor Alfa Electronics
AH80W ALUMINUM HOUSED RESISTORS HITANO

Other Datasheets by AiT Semiconductor

Part Number Description
AH8103 ULTRA-SENSITIVE HALL SWITCH
AH8113 CMOS HALL SWITCH
AH8115 HIGH SENSITIVITY CMOS HALL IC
AH8231 OMNIPOLAR HALL EFFECT SWITCH IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AiT Semiconductor Inc. www.ait-ic.com AH8102 HALL SWITCH MICROPOWER, ULTRA-SENSITIVE HALL EFFECT SWITCH DESCRIPTION FEATURES AH8102 is with two Hall effect plates and a CMOS  output driver, mainly designed for battery–powered,  hand-held equipment (such as Cellular and Cordless  Phone, PDA). E.g. as an On/Off switch in Cellular Flip-Phones, with battery operating voltages of 2.4V-5.5V. Either north or south pole of sufficient strength will turn the output on. The output will be turned off under no magnetic field. While the magnetic flux density (B) is larger than operate point (Bop), the output will be turned on (low), the output is held until B is lower than release point (Brp) ,then turned         off. Micropower operation Operation with North or South Pole 2.
Published: |