Datasheet4U Logo Datasheet4U.com

L9214G - Low-Cost Ringing SLIC

Download the L9214G datasheet PDF. This datasheet also covers the L9214A variant, as both devices belong to the same low-cost ringing slic family and are provided as variant models within a single manufacturer datasheet.

Features

  • s Low-cost solution s Onboard ringing generation with software adjustable crest factor switching s Flexible VCC options:.
  • 3.3 V or 5 V VCC.
  • No.
  • 5 V required s Power control options:.
  • Power control resistor.
  • Automatic battery switch to minimize off-hook power s Eight operating states:.
  • Scan mode for minimal power dissipation.
  • Forward and reverse battery active.
  • On-hook transmission states.
  • Ring mode.
  • Disconne.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (L9214A-AgereSystems.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number L9214G
Manufacturer Agere Systems
File Size 456.81 KB
Description Low-Cost Ringing SLIC
Datasheet download datasheet L9214G Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
L9277 CW Laser Diode HAMAMATSU

Other Datasheets by Agere Systems

Part Number Description
L9214A Low-Cost Ringing SLIC
L9215A Short-Loop Sine Wave Ringing SLIC
L9215G Short-Loop Sine Wave Ringing SLIC
L9216A Short-Loop Ringing SLIC
L9216G Short-Loop Ringing SLIC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Preliminary Data Sheet October 2001 L9214A/G Low-Cost Ringing SLIC Introduction The Agere Systems Inc. L9214 is a subscriber line interface circuit that is optimized to provide a very low-cost solution for short- and medium-loop applications. This device provides the complete set of line interface functionality, including power ringing needed to interface to a subscriber loop. This device has the capability to operate with a VCC supply of 3.3 V or 5 V and is designed to minimize external components required at all device interfaces. Features s Low-cost solution s Onboard ringing generation with software adjustable crest factor switching s Flexible VCC options: — 3.
Published: |