ALM-1812 - GPS Filter-LNA-Filter Front-End Module

AVAGO

Datasheet Details

Part number	ALM-1812
Manufacturer	AVAGO
File Size	315.21 KB
Description	GPS Filter-LNA-Filter Front-End Module
Datasheet	ALM-1812-AVAGO.pdf

Avago Technologies’ ALM-1812 is a GPS front-end module that combines a high-gain low-noise amplifier (LNA) with GPS FBAR filters.

 Very Low Noise Figure.
 Exceptional Cell/PCS-Band rejection.
 Low external component count.
 Fully-matched at RF input and RF output.
 Shutdown current: < 1 uA.
 CMOS compatible shutdown pin (SD).
 ESD: > 3kV at RFin pin.
 4.5 x 2.2 x 0.95 mm3 size.
 Adjustable bias current via single resistor/voltage.
 Lead-free, Halogen free and meets MSL3 Specifications (Typical performance @ 25°C) At 1.575GHz, Vdd = 2.8V, Idd = 6.8mA.
 Gain = 19.1 dB.

📁 ALM-1812 Similar Datasheet

ALM-1106 - GPS Low Noise Amplifier (Agilent Technologies)
ALM-11136 - 870 MHz - 915 MHz Low Noise High Linearity Amplifier (Avago)
ALM-1612 - GPS LNA-Filter Front-End (Avago)
ALM-38140 - 50MHz - 4GHz PIN Diode Variable Attenuator (AVAGO TECHNOLOGIES LIMITED)
ALM1106 - GPS Low Noise Amplifier (Agilent Technologies)
ALM1108 - Programmable Mixed-Signal IC (DIODES)
ALM2402-Q1 - Dual Op-amp (Texas Instruments)
ALM2402F-Q1 - Automotive Dual Operational Amplifier (Texas Instruments)

Other Datasheets by AVAGO

Published: Nov 27, 2014 |