Datasheet4U Logo Datasheet4U.com

ADNS-7550 - Integrated molded lead-frame DIP Sensor

Description

1 VCSEL+VE Positive Terminal of VCSEL 2 LASER_NEN LASER Enable (Active LOW) 3 NCS Chip select (active low input) 4 MISO Serial data output (Master In/Slave Out) 5 SCLK Serial clock input 6 MOSI 7 MOTION 8 XYLASER 9 VDD5 10 NC Serial data input (Master Out/Slave In) Motion Detect (active lo

Features

  • Wide operating voltage: 4.0V-5.25V.
  • Small form factor, integrated molded lead-frame chip- on-board package.
  • LaserStreamâ„¢ technology.
  • High speed motion detection up to 30 ips and 8g.
  • Enhanced SmartSpeed self-adjusting frame rate for optimum performance.
  • Motion detect pin output.
  • 12-bits motion data registers.
  • Internal oscillator.
  • no clock input needed.
  • Selectable 400, 800, 1200, 1600, 2000 cpi resolution.

📥 Download Datasheet

Datasheet Details

Part number ADNS-7550
Manufacturer AVAGO
File Size 439.00 KB
Description Integrated molded lead-frame DIP Sensor
Datasheet download datasheet ADNS-7550 Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADNS-7550 Integrated molded lead-frame DIP Sensor Data Sheet Theory of Operation The ADNS-7550 integrated molded lead-frame DIP sensor comprises of sensor and VCSEL in a single package. The advanced class of VCSEL was engineered by Avago Technologies to provide a laser diode with a single longitudinal and a single transverse mode. In contrast to most oxide-based single-mode VCSEL, this class of Avago VCSEL remains within single mode operation over a wide range of output power. It has significantly lower power consumption than a LED. It is an excellent choice for optical navigation applications.
Published: |