Datasheet4U Logo Datasheet4U.com

48-20PU - 8-bit Microcontroller

Description

VCC Digital supply voltage.

GND Ground.

Port B (PB7:0) XTAL1/XTAL2/TOSC1/TOSC2 Port B is an 8-bit bi-directional I/O port with internal pull-up resistors (selected for each bit).

Features

  • High Performance, Low Power AVR® 8-Bit Microcontroller.
  • Advanced RISC Architecture.
  • 131 Powerful Instructions.
  • Most Single Clock Cycle Execution.
  • 32 x 8 General Purpose Working Registers.
  • Fully Static Operation.
  • Up to 20 MIPS Throughput at 20 MHz.
  • On-chip 2-cycle Multiplier High Endurance Non-volatile Memory segments.
  • 4/8/16K Bytes of In-System Self-programmable Flash program memory.
  • 256/512/512 Bytes EEPR.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
48-24-xxx-xxx Miniature Power Relay OEN
48-12-xxx-xxx Miniature Power Relay OEN
48-48-xxx-xxx Miniature Power Relay OEN

Other Datasheets by Atmel (Microchip)

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Features • High Performance, Low Power AVR® 8-Bit Microcontroller • Advanced RISC Architecture – 131 Powerful Instructions – Most Single Clock Cycle Execution – 32 x 8 General Purpose Working Registers – Fully Static Operation – Up to 20 MIPS Throughput at 20 MHz – On-chip 2-cycle Multiplier High Endurance Non-volatile Memory segments – 4/8/16K Bytes of In-System Self-programmable Flash program memory – 256/512/512 Bytes EEPROM – 512/1K/1K Bytes Internal SRAM – Write/Erase cyles: 10,000 Flash/100,000 EEPROM – Data retention: 20 years at 85°C/100 years at 25°C(1) – Optional Boot Code Section with Independent Lock Bits In-System Programming by On-chip Boot Program True Read-While-Write Operation – Programming Lock for Software Security Peripheral Features – Two 8-bit Timer/Counters with Sepa
Published: |