NUC100VE3DN Datasheet | Nuvoton Technology

DESCRIPTION The Nu Micro® NUC100 series 32-bit microcontroller (MCU) is embedded with the ARM® Cortex® M0 core with the cost equivalent to traditional 8-bit MCU. The NUC100 series can be used in consumer electronics, industrial control and applications which requiring rich munication interfaces such as industrial automation, alarm system, energy system and power system. The Nu Micro® NUC100 Advanced Line and NUC120 USB Line are embedded with the Cortex® M0 core running up to 50 MHz and features 32/64/128 Kbytes Flash, 4/8/16 Kbytes embedded SRAM and 4 Kbytes loader ROM for the ISP. It operates at a wide voltage range of 2.5V ~ 5.5V and temperature range of -40℃ ~ +85℃. The NUC100 series is also provided with plenty of peripheral devices, such as Timers, Watchdog Timer, Window Watchdog Timer, RTC, PDMA with CRC calculation unit, UART, SPI, I2C, I2S, PWM Timer, GPIO, PS/2, EBI, Smart Card Host, 12-bit ADC, Analog parator, Low Voltage Reset Controller and Brown-out Detector. Additionally, the NUC120 USB Line is equipped with a USB 2.0 Full-speed Device. These peripherals have been incorporated into the NUC100 series to reduce ponent count, board space and system cost. The NUC100 series is equipped with ISP (In-System Programming), IAP (In-Application Programming) and ICP (In-Circuit Programming) functions, which allows the user to update the program under software control through the on-chip connectivity interface, such as SWD, UART and USB. Product Line UART I2C PS/2 I2S NUC100xxx DN - 1 NUC120xxx DN Table 1-1 Nu Micro® NUC100 Series Connectivity Support Table NUC100/120XXXDN DATASHEET Apr. 8, 2020 Page 8 of 109 Rev 1.04 NUC100/120xxx DN 2 FEATURES The equipped features are dependent on the product line and their sub products. 2.1 Nu Micro® NUC100 Features - Advanced Line - ARM® Cortex® -M0 core - Runs up to 50...