Datasheet4U Logo Datasheet4U.com

NPS1000 - load switch

Datasheet Summary

Description

NPS1000 is a low voltage, single-channel load switch with a low RDS,ON (11 mΩ) to minimize IR drop and power loss.

It supports up to 0.6 A RMS current and a peak current of 1.5 A.

The switch is controlled by an EN input which is compatible with 1.2 V logic levels.

Features

  • 0.5 V.
  • 1.0 V operation voltage.
  • Low RDS,ON: 11 mΩ typical at 25 °C, 16 mΩ (maximum) at 85 °C.
  • Enable logic supports 1.2 V logic levels.
  • 0.6 A RMS and 1.5 A peak current capability.
  • Controlled start-up.

📥 Download Datasheet

Datasheet preview – NPS1000

Datasheet Details

Part number NPS1000
Manufacturer nexperia
File Size 1.02 MB
Description load switch
Datasheet download datasheet NPS1000 Datasheet
Additional preview pages of the NPS1000 datasheet.

📁 Similar Datasheet

  • NPS-201A1 - (PS Series) Solid State Sensor Absolute or Differential Pressure (Nova Sensor)
  • NPS-xxxA1 - (PS Series) Solid State Sensor Absolute or Differential Pressure (Nova Sensor)
  • NPS-xxxA2 - (PS Series) Solid State Sensor Absolute or Differential Pressure (Nova Sensor)
  • NPS-xxxA3 - (PS Series) Solid State Sensor Absolute or Differential Pressure (Nova Sensor)
  • NPS-xxxD1 - (PS Series) Solid State Sensor Absolute or Differential Pressure (Nova Sensor)
  • NPS-xxxD2 - (PS Series) Solid State Sensor Absolute or Differential Pressure (Nova Sensor)
  • NPS-xxxD3 - (PS Series) Solid State Sensor Absolute or Differential Pressure (Nova Sensor)
  • NPS20 - Press Fit SCR (Naina Semiconductor)
  • NPS201A1 - (PS Series) Solid State Sensor Absolute or Differential Pressure (Nova Sensor)
  • NPS25 - Press Fit SCR (Naina Semiconductor)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
WLCSP8 NPS1000 0.5 V to 1.0 V, 1.5 A peak, 11 mΩ, load switch Rev. 1 — 29 March 2024 Product data sheet 1. General description NPS1000 is a low voltage, single-channel load switch with a low RDS,ON (11 mΩ) to minimize IR drop and power loss. It supports up to 0.6 A RMS current and a peak current of 1.5 A. The switch is controlled by an EN input which is compatible with 1.2 V logic levels. When the load switch is enabled, the internal switch charges the output capacitor with a controlled inrush current. When the switch is disabled, an 8 Ω on-chip resistor discharges the output to ground and keeps it from floating. The IC is powered from a separate BIAS pin which is rated for 2.3 V to 5.0 V operation.
Published: |