Datasheet4U Logo Datasheet4U.com

IP4234CZ6 - Single USB 2.0 ESD protection

Description

The IP4234CZ6 is designed to protect Input/Output (I/O) USB 2.0 ports, that are sensitive to capacitive loads, from being damaged by ElectroStatic Discharge (ESD).

Features

  • Pb-free and RoHS compliant.
  • Simple, direct signal routing provides for high speed signal integrity.
  • ESD protection compliant to IEC 61000-4-2 level 4, ±8 kV contact discharge.
  • Four low input capacitance (3.1 pF typical) rail-to-rail ESD protection diodest.
  • Low voltage clamping due to an integrated Zener diode.
  • Small 6-lead SO6 (SOT457) package.
  • IEC 61000-4-5 15 A Lightning (8/20 μs) compliant 1.3.

📥 Download Datasheet

Datasheet Details

Part number IP4234CZ6
Manufacturer Nexperia
File Size 176.67 KB
Description Single USB 2.0 ESD protection
Datasheet download datasheet IP4234CZ6 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IP4234CZ6 Single USB 2.0 ESD protection NXP
IP4238CZ10 Surge protection NXP Semiconductors
IP4220CZ6 Dual USB 2.0 integrated ESD protection NXP
IP4220CZ6 Dual USB 2.0 Integrated ESD protection to IEC 61000-4-2 level 4 Philips
IP4221CZ6-S ESD protection NXP

Other Datasheets by Nexperia

Part Number Description
IP4233CZ6 Ultra low capacitance ESD protection
IP4220CZ6 Dual USB 2.0 integrated ESD protection
IP4251-TTL passive filter network
IP4252-TTL passive filter network
IP4253-TTL passive filter network

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IP4234CZ6 Single USB 2.0 ESD protection to IEC 61000-4-2 level 4 Rev. 3.0 — 31 January 2018 Product data sheet 1 Product profile 1.1 General description The IP4234CZ6 is designed to protect Input/Output (I/O) USB 2.0 ports, that are sensitive to capacitive loads, from being damaged by ElectroStatic Discharge (ESD). The πfilter structure is implemented with a small series resistor to provide the necessary protection to signal and supply components from ESD voltages greater than ±8 kV contact discharge according IEC 61000-4-2, level 4. The ESD protection is independent of the supply voltage due to the rail-to-rail diode architecture being connected to a Zener diode.
Published: |