Datasheet4U Logo Datasheet4U.com

74LVC1G384-Q100 - Bilateral switch

Description

The 74LVC1G384-Q100 is a single pole, single throw analog switch.

It has two input/output terminals (Y and Z) and an enable pin (E).

When E is HIGH, the analog switch is turned off.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and -40 °C to +125 °C.
  • Wide supply voltage range from 1.65 V to 5.5 V.
  • Very low ON resistance:.
  • 7.5 Ω (typical) at VCC = 2.7 V.
  • 6.5 Ω (typical) at VCC = 3.3 V.
  • 6 Ω (typical) at VCC = 5 V.
  • ESD protection:.
  • MIL-STD-883, method 3015 exceeds 2000 V.
  • HBM EIA/JESD22-A114-A exceeds 2000 V.
  • MM EIA/JESD2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74LVC1G384 Bilateral switch NXP
74LVC1G38 2-input NAND gate NXP Semiconductors
74LVC1G386 3-input EXCLUSIVE-OR gate NXP Semiconductors
74LVC1G3157 SINGLE-POLE DOUBLE-THROW ANALOG SWITCH Diodes
74LVC1G3157 2-channel analog multiplexer/demultiplexer NXP Semiconductors

Other Datasheets by Nexperia

Part Number Description
74LVC1G384 Bilateral switch
74LVC1G38 2-input NAND gate
74LVC1G38-Q100 2-input NAND gate
74LVC1G386 3-input EXCLUSIVE-OR gate
74LVC1G3157 2-channel analog multiplexer/demultiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74LVC1G384-Q100 Bilateral switch Rev. 3 — 8 February 2022 Product data sheet 1. General description The 74LVC1G384-Q100 is a single pole, single throw analog switch. It has two input/output terminals (Y and Z) and an enable pin (E). When E is HIGH, the analog switch is turned off. Control inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at control inputs makes the circuit tolerant of slower input rise and fall times. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |