74HCT245D Datasheet | Nexperia

description The 74HC245; 74HCT245 is an 8-bit transceiver with 3-state outputs. The device features an output enable (OE) and send/receive (DIR) for direction control. A HIGH on OE causes the outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits - Wide supply voltage range from 2.0 V to 6.0 V - CMOS low power dissipation - High noise immunity - Octal bidirectional bus interface - Non-inverting 3-state outputs - Input levels: - For 74HC245: CMOS level - For 74HCT245: TTL level - plies with JEDEC standards - JESD8C (2.7 V to 3.6 V) - JESD7A (2.0 V to 6.0 V) - Latch-up performance exceeds 100 m A per JESD 78 Class II Level B - ESD protection: - HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V - CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V - Multiple package options - Specified from -40 °C to +85 °C and from -40 °C to +125 °C 3. Ordering information Table 1. Ordering information Type number Package Temperature range 74HC245D 74HCT245D -40 °C to +125 °C 74HC245PW 74HCT245PW -40 °C to +125 °C 74HC245BQ 74HCT245BQ -40 °C to +125 °C Name Description SO20 plastic small outline package; 20 leads; body width 7.5 mm TSSOP20 plastic thin shrink small outline package; 20 leads; body width 4.4 mm DHVQFN20 plastic dual in-line patible thermal enhanced very thin quad flat package; no leads; 20 terminals; body 2.5 × 4.5 × 0.85 mm Version SOT163-1 SOT360-1 SOT764-1 Nexperia...