Datasheet4U Logo Datasheet4U.com

74HC4067 - 16-channel analog multiplexer/demultiplexer

General Description

The 74HC4067; 74HCT4067 is a single-pole 16-throw analog switch (SP16T) suitable for use in analog or digital 16:1 multiplexer/demultiplexer applications.

Key Features

  • Wide supply voltage range from 2.0 V to 10.0 V.
  • Input levels S0, S1, S2, S3 and E inputs:.
  • For 74HC4067: CMOS level.
  • For 74HCT4067: TTL level.
  • CMOS low power dissipation.
  • High noise immunity.
  • Low ON resistance:.
  • 80 Ω (typical) at VCC = 4.5 V.
  • 70 Ω (typical) at VCC = 6.0 V.
  • 60 Ω (typical) at VCC = 9.0 V.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0.

📥 Download Datasheet

Datasheet Details

Part number 74HC4067
Manufacturer Nexperia
File Size 357.77 KB
Description 16-channel analog multiplexer/demultiplexer
Datasheet download datasheet 74HC4067 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC4067 16-Channel Analog Multiplexer / Demultiplexer NXP
74HC4060 14-STAGE ASYNCHRONOUS BINARY COUNTERS/OSCILLATORS Texas Instruments
74HC4060 14-stage binary ripple counter NXP Semiconductors
74HC4060-Q100 14-stage binary ripple counter NXP
74HC4066 Quad single-pole single-throw analog switch NXP

Other Datasheets by Nexperia

Part Number Description
74HC4067-Q100 16-channel analog multiplexer/demultiplexer
74HC4067D 16-channel analog multiplexer/demultiplexer
74HC4060 14-stage binary ripple counter
74HC4060-Q100 14-stage binary ripple counter
74HC4060BQ 14-stage binary ripple counter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC4067; 74HCT4067 16-channel analog multiplexer/demultiplexer Rev. 8 — 9 September 2021 Product data sheet 1. General description The 74HC4067; 74HCT4067 is a single-pole 16-throw analog switch (SP16T) suitable for use in analog or digital 16:1 multiplexer/demultiplexer applications. The switch features four digital select inputs (S0, S1, S2 and S3), sixteen independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits • Wide supply voltage range from 2.0 V to 10.