Datasheet4U Logo Datasheet4U.com

74HC4066-Q100 - Quad single-pole single-throw analog switch

Description

The 74HC4066-Q100; 74HCT4066-Q100 is a quad single pole, single throw analog switch.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Input levels nE inputs:.
  • For 74HC4066-Q100: CMOS level.
  • For 74HCT4066-Q100: TTL level.
  • Low ON resistance:.
  • 50 Ω (typical) at VCC = 4.5 V.
  • 45 Ω (typical) at VCC = 6.0 V.
  • 35 Ω (typical) at VCC = 9.0 V.
  • Specified in compliance with JEDEC standard no. 7A.
  • ESD protection:.

📥 Download Datasheet

Datasheet Details

Part number 74HC4066-Q100
Manufacturer Nexperia
File Size 301.90 KB
Description Quad single-pole single-throw analog switch
Datasheet download datasheet 74HC4066-Q100 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC4066 Quad single-pole single-throw analog switch NXP
74HC4066 High-Speed CMOS Logic Quad Bilateral Switch Texas Instruments
74HC4066D Quad Bilateral Switch Toshiba
74HC4066D High-Speed CMOS Logic Quad Bilateral Switch Texas Instruments
74HC4066DB High-Speed CMOS Logic Quad Bilateral Switch Texas Instruments

Other Datasheets by Nexperia

Part Number Description
74HC4066 Quad single-pole single-throw analog switch
74HC4066D Quad single-pole single-throw analog switch
74HC4066N Quad single-pole single-throw analog switch
74HC4066PW Quad single-pole single-throw analog switch
74HC4060 14-stage binary ripple counter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC4066-Q100; 74HCT4066-Q100 Quad single-pole single-throw analog switch Rev. 4 — 14 April 2020 Product data sheet 1. General description The 74HC4066-Q100; 74HCT4066-Q100 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |