Datasheet4U Logo Datasheet4U.com

74HC4016 - Quad single-pole single-throw analog switch

General Description

The 74HC4016 is a quad single pole, single throw analog switch.

Key Features

  • Input levels nE inputs:.
  • For 74HC4016: CMOS level.
  • Typical ‘break before make’ built-in.
  • Low ON resistance:.
  • 160  (typical) at VCC = 4.5 V.
  • 120  (typical) at VCC = 6.0 V.
  • 85  (typical) at VCC = 9.0 V.
  • Specified in compliance with JEDEC standard no. 7A.
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • Specified from 40 C to +85 C and 40 C to +125 C 3. Ordering information Table 1. Ordering inf.

📥 Download Datasheet

Datasheet Details

Part number 74HC4016
Manufacturer Nexperia
File Size 817.39 KB
Description Quad single-pole single-throw analog switch
Datasheet download datasheet 74HC4016 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC4016 Quad bilateral switches Philips
74HC40102 8-bit synchronous BCD down counter Philips
74HC40103 8-bit synchronous binary down counter NXP
74HC40104 4-bit bidirectional universal shift register Philips
74HC40105 4-bit x 16-word FIFO register NXP

Other Datasheets by Nexperia

Part Number Description
74HC4016D Quad single-pole single-throw analog switch
74HC4016PW Quad single-pole single-throw analog switch
74HC40103 8-bit synchronous binary down counter
74HC40103D 8-bit synchronous binary down counter
74HC40103PW 8-bit synchronous binary down counter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC4016 Quad single-pole single-throw analog switch Rev. 3 — 12 December 2016 Product data sheet 1. General description The 74HC4016 is a quad single pole, single throw analog switch. Each switch features two input/output terminals (nY and nZ) and an active HIGH enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits  Input levels nE inputs:  For 74HC4016: CMOS level  Typical ‘break before make’ built-in  Low ON resistance:  160  (typical) at VCC = 4.5 V  120  (typical) at VCC = 6.0 V  85  (typical) at VCC = 9.0 V  Specified in compliance with JEDEC standard no.