Datasheet4U Logo Datasheet4U.com

74HC2G66GT - Dual single-pole single-throw analog switch

This page provides the datasheet information for the 74HC2G66GT, a member of the 74HC2G66 Dual single-pole single-throw analog switch family.

Description

The 74HC2G66; 74HCT2G66 is a dual single pole, single-throw analog switch.

Each switch has two input/output terminals (nY and nZ) and a digital enable input (nE).

When nE is LOW, the analog switch is turned off.

Features

  • Wide supply voltage range from 2.0 V to 10.0 V for 74HC2G66.
  • Very low ON resistance:.
  • 41 Ω (typ. ) at VCC = 4.5 V.
  • 30 Ω (typ. ) at VCC = 6.0 V.
  • 21 Ω (typ. ) at VCC = 9.0 V.
  • High noise immunity.
  • Low power dissipation.
  • 25 mA continuous switch current.
  • Multiple package options.
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115-A exceeds 200 V.
  • Specified from -40 °C to +8.

📥 Download Datasheet

Datasheet preview – 74HC2G66GT

Datasheet Details

Part number 74HC2G66GT
Manufacturer nexperia
File Size 275.87 KB
Description Dual single-pole single-throw analog switch
Datasheet download datasheet 74HC2G66GT Datasheet
Additional preview pages of the 74HC2G66GT datasheet.

📁 Similar Datasheet

  • 74HC2G66 - Dual single-pole single-throw analog switch (NXP Semiconductors)
  • 74HC2G00 - Dual 2-input NAND gate (Philips)
  • 74HC2G02 - Dual 2-input NOR gate (NXP)
  • 74HC2G08 - Dual 2-input AND gate (Philips)
  • 74HC2G125 - Dual buffer/line driver (NXP)
  • 74HC2G126 - Dual buffer/line driver (Philips)
  • 74HC2G126 - Dual buffer/line driver (NXP)
  • 74HC2G17 - Dual non-Inverting Schmitt Trigger (NXP)
  • 74HC2G32 - Dual 2-input OR gate (Philips)
  • 74HC2G34 - Dual Buffer Gate (NXP)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC2G66; 74HCT2G66 Dual single-pole single-throw analog switch Rev. 11 — 6 November 2018 Product data sheet 1. General description The 74HC2G66; 74HCT2G66 is a dual single pole, single-throw analog switch. Each switch has two input/output terminals (nY and nZ) and a digital enable input (nE). When nE is LOW, the analog switch is turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2. Features and benefits • Wide supply voltage range from 2.0 V to 10.0 V for 74HC2G66 • Very low ON resistance: • 41 Ω (typ.) at VCC = 4.5 V • 30 Ω (typ.) at VCC = 6.0 V • 21 Ω (typ.) at VCC = 9.
Published: |