Datasheet4U Logo Datasheet4U.com

74HC153-Q100 - Dual 4-input multiplexer

General Description

The 74HC153-Q100; 74HCT153-Q100 is a dual 4-input multiplexer.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Input levels:.
  • For 74HC153-Q100: CMOS level.
  • For 74HCT153-Q100: TTL level.
  • Non-inverting outputs.
  • Separate e.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC153 Dual 4-input multiplexer NXP
74HC153 Dual 4-input multiplexer Philips
74HC153 Dual 4-Line To 1-Line Data Selectors/Multiplexers Texas Instruments
74HC153 Dual 4-Input Data Selector/Multiplexer Motorola
74HC153A Dual 4-Input Data Selector/Multiplexer ON Semiconductor

Other Datasheets by Nexperia

Part Number Description
74HC153 Dual 4-input multiplexer
74HC153D Dual 4-input multiplexer
74HC153DB Dual 4-input multiplexer
74HC153PW Dual 4-input multiplexer
74HC151 8-input multiplexer

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC153-Q100; 74HCT153-Q100 Dual 4-input multiplexer Rev. 5 — 13 August 2021 Product data sheet 1. General description The 74HC153-Q100; 74HCT153-Q100 is a dual 4-input multiplexer. The device features independent enable inputs (nE) and common data select inputs (S0 and S1). For each multiplexer, the select inputs select one of the four binary inputs and routes it to the multiplexer output (nY). A HIGH on E forces the corresponding multiplexer outputs LOW. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.