74AVCH1T45-Q100 Datasheet PDF (Dual-supply voltage level translator/transceiver)

74AVCH1T45-Q100 - Dual-supply voltage level translator/transceiver

Description

The 74AVCH1T45-Q100 is a single bit, dual supply transceiver that enables bidirectional level translation.

The 74AVCH1T45 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level.

Features

Automotive product qualification in accordance with AEC-Q100 (Grade 1).
Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
Wide supply voltage range from 0.8 V to 3.6 V.
High noise immunity.
CMOS low power dissipation.
Overvoltage tolerant inputs to 3.6 V.
Dynamically controlled outpus.
Complies with JEDEC standards:.
JESD8-12 (0.8 V to 1.3 V).
JESD8-11 (0.9 V to 1.65 V).
JESD8-7 (1.2 V t.

Datasheet Details

Part number	74AVCH1T45-Q100
Manufacturer	nexperia
File Size	278.91 KB
Description	Dual-supply voltage level translator/transceiver
Datasheet	74AVCH1T45-Q100 Datasheet
Additional preview pages of the 74AVCH1T45-Q100 datasheet.

📁 Similar Datasheet

74AVCH1T45 - SINGLE BIT DUAL POWER SUPPLY TRANSLATING TRANSCEIVER (DIODES)

74AVCH16244 - 16-bit buffer/line driver (NXP)

74AVCH16245 - 16-bit transceiver (NXP)

74AVCH16T245 - 16-bit Transceiver (NXP)

74AVCH20T245 - 20-bit Dual Supply Translating Transceiver (NXP)

74AVCH4T245 - 4-bit dual supply translating transceiver (NXP Semiconductors)

74AVCH8T245 - 8-bit dual supply translating transceiver (NXP)

74AVC16244 - 16-bit buffer/line driver (NXP)

74AVC16245 - 16-bit transceiver (NXP)

74AVC16334A - 16-bit registered driver (NXP Semiconductors)

Full PDF Text Transcription

Click to expand full text

74AVCH1T45-Q100 Dual-supply voltage level translator/transceiver; 3-state Rev. 4.1 — 31 March 2022 Product data sheet 1. General description The 74AVCH1T45-Q100 is a single bit, dual supply transceiver that enables bidirectional level translation. The 74AVCH1T45 has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing potentially damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.

Published: Jul 29, 2019 |