Datasheet4U Logo Datasheet4U.com

74AVCH16245 - 16-bit transceiver

General Description

The 74AVCH16245 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions.

Key Features

  • Wide supply voltage range from 1.2 V to 3.6 V.
  • Complies with JEDEC standards:.
  • JESD8-7 (1.2 V to 1.95 V).
  • JESD8-5 (1.8 V to 2.7 V).
  • JESD8-1A (2.7 V to 3.6 V).
  • CMOS low power consumption.
  • Input/output tolerant up to 3.6 V.
  • Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation.
  • Low inductance multiple VCC and GND pins to minimize noise and ground bounce.
  • Supports Live I.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74AVCH16245 16-bit transceiver with direction pin; 3.6 V tolerant; 3-state Rev. 3 — 8 January 2013 Product data sheet 1. General description The 74AVCH16245 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features two output enable inputs (nOE) for easy cascading and two send/receive inputs (nDIR) for direction control. Inputs nOE control the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver. The 74AVCH16245 is designed to have an extremely fast propagation delay and a minimum amount of power consumption.