Datasheet4U Logo Datasheet4U.com

74AVC1T8832 - Single dual-supply translating 2-input OR

General Description

The 74AVC1T8832 is a single dual-supply translating 2-input OR with strobe inputs.

Key Features

  • Wide supply voltage range:.
  • VCC(A): 0.8 V to 3.6 V.
  • VCC(B): 0.8 V to 3.6 V.
  • High noise immunity.
  • Complies with JEDEC standards:.
  • JESD8-12 (0.8 V to 1.3 V).
  • JESD8-11 (0.9 V to 1.65 V).
  • JESD8-7 (1.2 V to 1.95 V).
  • JESD8-5 (1.8 V to 2.7 V).
  • JESD8-B (2.7 V to 3.6 V).
  • ESD protection:.
  • HBM: ANSI/ESDA/JEDEC JS-001 exceeds 8000 V.
  • CDM: ANSI/ESDA/JEDEC JS-002 exceeds 1000 V.
  • Maxim.

📥 Download Datasheet

Datasheet Details

Part number 74AVC1T8832
Manufacturer Nexperia
File Size 198.36 KB
Description Single dual-supply translating 2-input OR
Datasheet download datasheet 74AVC1T8832 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74AVC1T45 SINGLE BIT DUAL POWER SUPPLY TRANSLATING TRANSCEIVER Diodes
74AVC1T45 Dual-supply voltage level translator/transceiver NXP
74AVC16244 16-bit buffer/line driver NXP
74AVC16245 16-bit transceiver NXP
74AVC16334A 16-bit registered driver NXP Semiconductors

Other Datasheets by Nexperia

Part Number Description
74AVC1T8128 Single dual-supply translating 2-input NOR
74AVC1T1004 1-to-4 fan-out buffer
74AVC1T1022 1-to-4 fan-out buffer
74AVC1T45 Dual-supply voltage level translator/transceiver
74AVC1T45-Q100 Dual-supply voltage level translator/transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74AVC1T8832 Single dual-supply translating 2-input OR with strobe Rev. 1 — 10 October 2018 Product data sheet 1. General description The 74AVC1T8832 is a single dual-supply translating 2-input OR with strobe inputs. It features two data input pins (A, B), two strobe input pins (STRA, STRB), one data output pin (Y) and dual-supply pins (VCC(A) and VCC(B)). Both VCC(A) and VCC(B) can be supplied at any voltage between 0.8 V and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins A, B, STRA and STRB are referenced to VCC(A) and pin Y is referenced to VCC(B). The logic equation provided at the Y output is: Y = STRA•A + STRB•B The device is fully specified for partial power-down applications using IOFF.