Datasheet4U Logo Datasheet4U.com

74AVC16244 - 16-bit buffer/line driver

General Description

The 74AVC16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs.

This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer.

The 3‑state outputs are controlled by the output enable inputs nOE.

Key Features

  • Wide supply voltage range from 1.2 V to 3.6 V.
  • Complies with JEDEC standards:.
  • JESD8-7 (1.2 V to 1.95 V).
  • JESD8-5 (1.8 V to 2.7 V).
  • JESD8-1A (2.7 V to 3.6 V).
  • CMOS low power consumption.
  • Input/output tolerant up to 3.6 V.
  • Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation.
  • Low inductance multiple VCC and GND pins to minimize noise an.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74AVC16244 16-bit buffer/line driver; 3.6 V tolerant; 3-state Rev. 3 — 20 February 2018 Product data sheet 1 General description The 74AVC16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs. This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The 3‑state outputs are controlled by the output enable inputs nOE. A HIGH level on input nOE causes the outputs to assume a high-impedance OFF-state. The 74AVC16244 is designed to have an extremely fast propagation delay and a minimum amount of power consumption. To ensure the high-impedance output state during power-up or power-down, input nOE should be tied to VCC through a pull-up resistor (Live Insertion).