Datasheet4U Logo Datasheet4U.com

74AUP2G06 - Low-power dual inverter

General Description

The 74AUP2G06 provides two inverting buffers with open-drain output.

The output of the device is an open drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions.

Key Features

  • Wide supply voltage range from 0.8 V to 3.6 V.
  • High noise immunity.
  • Low static power consumption; ICC = 0.9 μA (maximum).
  • Latch-up performance exceeds 100 mA per JESD 78B Class II.
  • Inputs accept voltages up to 3.6 V.
  • Low noise overshoot and undershoot < 10 % of VCC.
  • IOFF circuitry provides partial Power-down mode operation.
  • Complies with JEDEC standards:.
  • JESD8-12 (0.8 V to 1.3 V).
  • JESD8-11 (0.9 V to 1.65.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74AUP2G06 DUAL INVERTERS Diodes
74AUP2G00 Low-power dual 2-input NAND gate NXP
74AUP2G00 DUAL NAND GATE Diodes
74AUP2G02 DUAL NOR GATE Diodes
74AUP2G02 Low-power Dual 2-input NOR Gate NXP

Other Datasheets by Nexperia

Part Number Description
74AUP2G0604 Low-power inverting buffer
74AUP2G00 Low-power dual 2-input NAND gate
74AUP2G00-Q100 Low-power dual 2-input NAND gate
74AUP2G02 Low-power dual 2-input NOR gate
74AUP2G04 Low-power dual inverter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74AUP2G06 Low-power dual inverter with open-drain output Rev. 8 — 31 January 2022 Product data sheet 1. General description The 74AUP2G06 provides two inverting buffers with open-drain output. The output of the device is an open drain and can be connected to other open-drain outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V. This device is fully specified for partial Power-down applications using IOFF.