Datasheet4U Logo Datasheet4U.com

LN5924 - Constant-Current White LED Bias

Description

The LN5924 is a high performance ultra low- dropout constant current bias supply for white LEDs.

It can be used as an alternative to the simple ballast resistors in conventional parallel white LEDs applications.

Features

  • Ultra low 60mV dropout at 20mA.
  • 3% high accuracy current matching.
  • 20mA full scale current.
  • 16 level linear current brightness control.
  • PWM brightness control.
  • 2.5V to 5.5V supply voltage range.
  • Thermal shutdown function.
  • Under-voltage protection function.
  • Package.
  • DFN2×2-8.
  • DFN2×2-6.
  • QFN3×3-16 Function Denotes Package Type: DFN2×2-8 Denotes Package Type: DFN2×2-6 Denotes Package Type: QFN3×3-16 Customer requirements Embossed Tape :Standard.

📥 Download Datasheet

Datasheet Details

Part number LN5924
Manufacturer natlinear
File Size 442.45 KB
Description Constant-Current White LED Bias
Datasheet download datasheet LN5924 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LN59 GaAs Bi-directional Infrared Light Emitting Diodes Panasonic Semiconductor
LN59-LNA2702L GaAs Bi-directional Infrared Light Emitting Diodes Panasonic Semiconductor
LN503G Numeric Display Panasonic Semiconductor
LN503R Numeric Display Panasonic Semiconductor
LN503Y Numeric Display Panasonic Semiconductor

Other Datasheets by natlinear

Part Number Description
LN5920 Constant-Current White LED Bias
LN5921 Constant-Current White LED Bias
LN5925 Constant-Current White LED Bias
LN5926 Constant-Current White LED Bias
LN5935 370mA Low Dropout Constant Current LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ultra Low-Dropout, Constant-Current White LED Bias LN5924 ■ General Description The LN5924 is a high performance ultra low- dropout constant current bias supply for white LEDs. It can be used as an alternative to the simple ballast resistors in conventional parallel white LEDs applications. For dimming control, an enable input pin is controlled by processor GPIO output pulses for 16 level linear current. Using a low frequency PWM waveform to this enable input pin also controls the average LED current which is proportional to the PWM duty. The LN5924 is suitable for single cell Li-ion battery power device that using low forward voltage white LEDs. The white LEDs can be powered directly from battery without extra external components.
Published: |