Datasheet4U Logo Datasheet4U.com

LN5052 - High Speed Low Dropout Middle Current Voltage Regulators

Description

The LN5052 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes.

Features

  • s.
  • Output Voltage Range: 1.1V to 5.0V (selectable in 100mV steps).
  • Highly Accurate: ±2%.
  • Dropout Voltage: 100mV @ 100mA (3.0V type).
  • High Ripple Rejection: 60dB (1 kHz).
  • Low Power Consumption: 60μA (TYP. ).
  • Maximum Output Current : 500mA (VIN≥VOUT+1v).
  • Standby Current : less than 1.0μA.
  • Internal protector: current limiter.
  • Internal discharge MOS.

📥 Download Datasheet

Datasheet Details

Part number LN5052
Manufacturer natlinear
File Size 510.90 KB
Description High Speed Low Dropout Middle Current Voltage Regulators
Datasheet download datasheet LN5052 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LN503G Numeric Display Panasonic Semiconductor
LN503R Numeric Display Panasonic Semiconductor
LN503Y Numeric Display Panasonic Semiconductor
LN504G Numeric Display Panasonic Semiconductor
LN504R Numeric Display Panasonic Semiconductor

Other Datasheets by natlinear

Part Number Description
LN5050 Low Power High Input Voltage CMOS Voltage Regulator
LN5058 PWM/PFM control DC-DC Synchronous Step-Down Converter
LN5001 High Ripple-Rejection Low Dropout Low Input-And-Output Capacitance CMOS Voltage Regulator
LN5012 Low Power High Input Voltage CMOS Voltage Regulator
LN5024 16-bit constant current LED sink driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
High Speed Low Dropout Middle Current Voltage Regulators LN5052 ■ General Description The LN5052 series are highly precise, low noise, positive voltage LDO regulators manufactured using CMOS processes. The series achieves high ripple rejection and low dropout and consists of a standard voltage source, an error correction, current limiter and a phase compensation circuit plus a driver transistor. Output voltage is selectable in 100mV increments within a range of 1.1V ~ 5.0V. The series is also compatible with low ESR ceramic capacitors which give added output stability. This stability can be maintained even during load fluctuations due to the excellent transient response of the series.
Published: |