900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Murata Manufacturing Electronic Components Datasheet

SF2415E-1 Datasheet

SAW Filter

No Preview Available !

• Low Loss Filter for ISM Band
AEC-Q200
RoHS Compliance
This component is compliant
with RoHS directive.
This component was always
RoHS compliant from the first
date of manufacture.
SF2415E-1
869.00 MHz
SAW Filter
A1 Maximum Ratings
Rating
Input Power Level
DC Voltage
Operable Temperature Range
Storage Temperature Range in Tape and Reel
Specification Temperature Range
Soldering Profile Maximum Temperature, 5 cycles/10 s maximum
Value
20
6
-45 to +125
-40 to +85
-40 to +80
265
Units
dBm
V
°C
°C
°C
°C
SM3030-6
B1 Electrical Characteristics
Characteristic
Center Frequency
Insertion Loss, 868 to 870 MHz
Amplitude Ripple, 868 to 870 MHz
VSWR, 868 to 870 MHz
Attenuation Referenced to 0dB
50 to 791 MHz
791 to 835 MHz
835 to 848 MHz
848 to 862 MHz
880 to 883 MHz
883 to 1000 MHz
Source Impedance
Load Impedance
Case Style
Lid Symbolization, Y=year, WW=week, S=shift, Dot=pin 1 indicator
Standard Reel Quantity
Reel Size 7 Inch
Reel Size 13 Inch
Electrical Connections
Connection
Port 1 (Input)
Port 2 (Output)
Case Ground
Terminals
2
5
All others
Sym
fC
IL
Notes
Min
Typ
869.00
3.0
0.5
1.5
Max
4.5
1.6
2.5
43 63
41 57
39 52
18 40
12 28
38 50
ZS 50
ZL 50
SM3030-6 3.0 x 3.0 mm Nominal Footprint
A1, YWWS
500 Pieces/Reel
3000 Pieces/Reel
Units
MHz
dB
dBP-P
dB
Test Circuit
2 SAW
50Ω
5
50Ω
CAUTION: Electrostatic Sensitive Device. Observe precautions for
handling.
1, 3, 4, 6
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance
matching to 50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external
impedance matching design. See Application Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter are subject to change.
5. US and international patents may apply.
6. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2016
SF2415E-1 (R) 6/15/18
Page 1 of 5
www.murata.com


Murata Manufacturing Electronic Components Datasheet

SF2415E-1 Datasheet

SAW Filter

No Preview Available !

Frequency Characteristics
S21 response: (Span 200 MHz)
S21 response: (Span 20 MHz)
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. April 2016
SF2415E-1 (R) 6/15/18
Page 2 of 5
www.murata.com


Part Number SF2415E-1
Description SAW Filter
Maker muRata
PDF Download

SF2415E-1 Datasheet PDF






Similar Datasheet

1 SF2415E-1 SAW Filter
muRata





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy