900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Murata Manufacturing Electronic Components Datasheet

SF2098E Datasheet

SAW Filter

No Preview Available !

SF2098E
• Low-loss 915 MHz SAW Filter
• Designed for 50 ohm Source/Load
• Complies with Directive 2002/95/EC (RoHS)
Pb
Absolute Maximum Ratings
Rating
Input Power Level
DC Voltage on any Non-ground Terminal
Operating Temperature Range
Component Storage Temperature Range
Storage Temperature Range in Tape and Reel
Maximum Soldering Profile, 5 cycles/10 seconds maximum
Temperature Coefficient of Frequency
Electrical Characteristics
Characteristic (Operating Temperature -40°C to +85°C)
Center Frequency
Insertion Loss, 902 to 928 MHz
Amplitude Ripple, 902 to 928 MHz
VSWR, 902 to 928 MHz
Attenuation, Referenced to 0 dB:
10 to 800 MHz
800 to 888 MHz at 25°C
800 to 888 MHz at -40°C to +85°C
888 to 890 MHz 25°C
888 to 890 MHz at -40°C to +85°C
890 to 894 Mhz
940 to 941 MHz
941 to 967 MHz
967 to 1350 MHz
1350 to 1600 MHz
1600 to 2000 MHz
2000 to 2500 MHz
Source Impedance
Load Impedance
Case Style
Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator
Standard Reel Quantity, 7 inch Reel Size
Standard Reel Quantity, 13 inch Reel Size
Value
+15
5
-40 to +125
-40 to +125
-40 to +85
265
-36
Units
dBm
V
°C
°C
°C
°C
ppm/°C
915 MHz
SAW Filter
SM3030-6
Sym
fC
IL
Notes
Min
Typ
915
1.9
1.0
1.8:1
Max
4.0
3.2
2.2:1
35 37
36 38
29 38
24 31
22 31
5 18
27 47
35 49
37 39
35 42
30 45
28 35
ZS 50
ZL 50
SM3030-6 3.0 x 3.0 mm Nominal Footprint
A66, YWWS
500 Pieces/Reel
3000 Pieces/Reel
Units
MHz
0
dB
dB
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
NOTES:
1. Unless noted otherwise, all specifications apply over the operating temperature range with filter soldered to the specified demonstration board with impedance matching to
50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance
matching design. See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and "ENG" or "E" indicates "engineering prototypes."
5. The design, manufacturing process, and specifications of this filter are subject to change.
6. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that
the filter must always be installed in one direction per the circuit design.
7. US and international patents may apply.
8. Murata, stylized Murata logo, and Murata N.A., Inc. are registered trademarks of Murata Manufacturing Co., Ltd.
©C2o0p1y0r-i2g0h1t5©byMMuurraattaaEMleactnrounfiaccstNu.rAin.,gInCc.o., Ltd. All Rights Reserved 2015
SF2098E (R) 8/31/15
Page 1 of 6
www.murata.com


Murata Manufacturing Electronic Components Datasheet

SF2098E Datasheet

SAW Filter

No Preview Available !

Electrical Characteristics
Characteristic (Operating Temperature -40°C to +125°C)
Center Frequency
Insertion Loss, 902 to 928 MHz
Amplitude Ripple, 902 to 928 MHz
VSWR, 902 to 928 MHz
Attenuation, Referenced to 0 dB:
10 to 800 MHz
800 to 888 MHz at 25°C
800 to 888 MHz at -40°C to +125°C
888 to 890 MHz 25°C
888 to 890 MHz at -40°C to +125°C
940 to 941 MHz
941 to 967 MHz
967 to 1350 MHz
1350 to 1600 MHz
1600 to 2000 MHz
2000 to 2500 MHz
Source Impedance
Load Impedance
Case Style
Lid Symbolization (Y=year, WW=week, S=shift) dot=pin 1 indicator
Standard Reel Quantity, 7 inch Reel Size
Standard Reel Quantity, 13 inch Reel Size
Sym
fC
IL
Notes
Min
Typ
915
1.9
1.0
1.8:1
Max
4.5
3.7
2.5:1
35 37
36 38
15 38
24 31
10 31
27 47
35 49
37 39
35 42
30 45
28 35
ZS 50
ZL 50
SM3030-6 3.0 x 3.0 mm Nominal Footprint
A66, YWWS
500 Pieces/Reel
3000 Pieces/Reel
Units
MHz
dB
dB
dB
Electrical Connections
Connection
Input
Output
Case Ground
Terminals
2
5
All others
5 0 o 5h 0m
22 S5 F. 20 9& 8$ E- 55
1 1, ,3 3, ,44 ,, 66
55 00 o h m
C©o20p1y0r-i2g0h1t5©byMMuurraattaaEMleacntrounfaiccstNu.rAin.,gInCc.o., Ltd. All Rights Reserved 2015
SF2098E (R) 8/31/15
Page 2 of 6
www.murata.com


Part Number SF2098E
Description SAW Filter
Maker muRata
PDF Download

SF2098E Datasheet PDF






Similar Datasheet

1 SF2098E SAW Filter
muRata
2 SF2098G SAW Filter
RFM





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy