900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Murata Manufacturing Electronic Components Datasheet

SF1183E Datasheet

881.5MHz SAW Filter

No Preview Available !

• RF Filter for Mobile Communication Applications
• Low Insertion Loss
• 3.0 x 3.0 x 1.3 mm Surface-mount Case
• No Matching Circuit Required
Absolute Maximum Ratings
Rating
Maximum Input Power
Maximum DC Voltage
Operable Temperature Range
Specification Temperature Range
Storage Temperature Range
Max Soldering Profile
Value
Units
+10 dBm
5 VDC
-45 to +125
°C
-30 to +85
°C
-40 to +85
°C
265 °C for 10 s
SF1183E
881.5 MHz
SAW Filter
SM3030-6
Electrical Characteristics
Characteristic
Nominal Operating Frequency
Insertion Loss, 869 to 894 MHz
Amplitude Ripple, p-p, 869 to 894 MHz
Attenuation (Reference level from 0 dB)
DC to 824 MHz
824 to 849 MHz
970 to 997 MHz
997 to 1150 MHz
1150 to 1500 MHz
1500 to 2000 MHz
2000 to 3000 MHz
VSWR, 869 to 894 MHz
Source impedance
Load impedance
Single Ended Input / Output, Impedance match
Case Style
Lid Symbolization (Y=year, WW=week, S=day)
Sym
fC
IL
ZS
ZL
Notes
1
1, 2, 3
Min Typ Max Units
881.5
MHz
2.3
0.8
3.0
1.5
dB
40 50
35 47
35 64
40 60
dB
30 51
25 41
20 27
1.6:1
2.0:1
MHz
50
50
No matching network required for operation at 50 ohms
SM3030-6 3 x 3 mm Nominal Footprint
A92 YWWS
Electrical Connections
Connection
Input
Output
Ground
Terminals
2
5
All others
50
pin 2
pin 5
SAW Filter
TOP VIEW
All Others
50
NOTES:
1. Unless noted otherwise, all specifications apply over the operating temperature
range with filter soldered to the specified demonstration board with impedance
matching to 50 and measured with 50 network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced to the nom-
inal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in the pass-
band. Rejection in final user application is dependent on PCB layout and exter-
nal impedance matching design. See Application Note No. 42 for details.
4. "LRIP" or "L" after the part number indicates "low rate initial production" and
5.
6.
7.
8.
9.
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF1183E (R) 6/6/17
Page 1 of 5
"ENG" or "E" indicates "engineering prototypes."
The design, manufacturing process, and specifications of this filter are subject
to change.
Either Port 1 or Port 2 may be used for either input or output in the design.
However, impedances and impedance matching may vary between Port 1 and
Port 2, so that the filter must always be installed in one direction per the circuit
design.
US and international patents may apply.
RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of
RF Monolithics, Inc.
Electrostatic Sensitive Device. Observe precautions for handling.
www.murata.com


Murata Manufacturing Electronic Components Datasheet

SF1183E Datasheet

881.5MHz SAW Filter

No Preview Available !

Filter Frequency Response Plots
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. March 2014
SF1183E (R) 6/6/17
Page 2 of 5
www.murata.com


Part Number SF1183E
Description 881.5MHz SAW Filter
Maker muRata
PDF Download

SF1183E Datasheet PDF






Similar Datasheet

1 SF1183B SAW Filter
RF Monolithics
2 SF1183E 881.5MHz SAW Filter
muRata
3 SF1183G SAW Filter
RF Monolithics





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy