iT3011E Datasheet | gigoptix

Description The i T3011E is a Ro HS-6-pliant limiting amplifier for use as a post amplifier in OC-192 and STM-64 optical receivers. Signals as small as +/-7 m Vpp differential can be amplified to 1.28 Vpp differential. Offset correction and output voltage control are provided. Both AC and DC coupling are allowed at the input and output. The high sensitivity allows the device to be used at the output of a transimpedance amplifier. ¾ 3-d B bandwidth: 10 GHz ¾ Differential gain: 42 d B ¾ Saturated output: 640 m Vpp on each output into 50 ohms ¾ Input sensitivity 2.5 m Vpp at BER<1E-12 ¾ Single bias supply: -5.2 V ¾ Power consumption: Less than 572 m W ¾ Bias current: 95 m A ¾ DC offset correction ¾ Amplitude voltage control ¾ Low RMS jitter degradation i T3011E Features .. ¾ Ro HS-6-pliant 4x4 mm QFN (MO-220) package Absolute Maximum Ratings Symbol Vee1, 2 Parameters/conditions Power supply voltage Applied voltage at data input Vd (differential) Applied voltage at data input (single Vm ended) Ioffset(+),(-) Offset control current Tch Tstg Maximum channel temperature Storage temperature Min. -8 Max. 0 3 1.5 5 Units V V V m A C °C o -65 150 150 Remended Operating Conditions Symbol Tc Vee1 Vee2 Iee1+Iee2 Voffset (+) Voffset (-) Vctrl Vd Vm Vindc Parameters/conditions Operating temperature range (Tcase) Power supply voltage Power supply voltage Total bias supply current Offset control voltage Offset control voltage Amplitude voltage control Applied peak to peak voltage at data input (differential) Applied peak to peak voltage at data input (single ended) Input/output interface DC input voltage (with DC-coupled input) Min. 0 -5.45 -5.45 80 -5 -5 -5.2 7 14 Typ. -5.2 -5.2 95 Max. 85 -4.95 -4.95 110 5 5 0 1000 1000 Units o C V V m A V V V m V m V V AC and DC coupled -0.5 0.5 For pricing, delivery, and ordering information, please contact Gig Optix at (650) 424-1937, e-mail: sales@gigoptix., or visit our site at .Gig Optix.. 12.5 Gb/s High-Sensitivity Limiter...