Datasheet4U Logo Datasheet4U.com

UCC27710 - 1.0-A High-Side Low-Side Gate Driver

General Description

The UCC27710 is a 620-V high-side and low-side gate driver with 0.5-A source, 1.0-A sink current, targeted to drive power MOSFETs or IGBTs.

The recommended VDD operating voltage is 10-V to 20-V for IGBT's and 10-V to 17-V for power MOSFETs.

Key Features

  • 1 High-Side and Low-Side Configuration.
  • Dual Inputs With Output Interlock and 150-ns Deadtime.
  • Fully Operational up to 620-V, 700-V Absolute Maximum on HB Pin.
  • 10-V to 20-V VDD Recommended Range.
  • Peak Output Current 0.5-A Source, 1.0-A Sink.
  • dv/dt Immunity of 50 V/ns.
  • Logic Operational up to.
  • 11 V on HS Pin.
  • Negative Voltage Tolerance On Inputs of.
  • 5 V.
  • Large Negative Transient Safe Operating Area.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UCC2750 Source Ringer Controller Unitrode
UCC27519DBVR 4A Single-Channel Non-Inverting Gate Driver UMW
UCC2105 CC/CV MODE STEP DOWN SWITCHING REGULATOR UTC
UCC25701 Advanced Voltage Mode Pulse Width Modulator Unitrode
UCC25702 Advanced Voltage Mode Pulse Width Modulator Unitrode

Other Datasheets by Texas Instruments

Part Number Description
UCC27714 High-Speed 600-V High-Side Low-Side Gate Driver
UCC27200 High-Side and Low-Side Driver
UCC27200A High-Side and Low-Side Driver
UCC27201 High-Side and Low-Side Driver
UCC27201A High-Side and Low-Side Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community UCC27710 SLUSD05B – OCTOBER 2017 – REVISED AUGUST 2018 UCC27710 620-V, 0.5-A, 1.0-A High-Side Low-Side Gate Driver with Interlock 1 Features •1 High-Side and Low-Side Configuration • Dual Inputs With Output Interlock and 150-ns Deadtime • Fully Operational up to 620-V, 700-V Absolute Maximum on HB Pin • 10-V to 20-V VDD Recommended Range • Peak Output Current 0.5-A Source, 1.